Numerical Modelling of Fouling Process in EGR System: A Review

Referencias bibliográficas

• G. Assembly. Resolution adopted by the General Assembly on 19 September 2016. A/RES/71/1, 3 October 2016 (The New York Declaration); 2010
• Anenberg SC, Miller J, Minjares R, Du L, Henze DK, Lacey F, et al. Impacts and mitigation of excess diesel-related NOx emissions in 11 major vehicle markets. Nature. 2017;545(7655):467–471. DOI: 10.1038/nature22086
• Joshi A. Review of vehicle engine efficiency and emissions. In: SAE Technical Paper Series. 2019. DOI: 10.4271/2019-01-0314
• Vestreng V, Ntziachristos L, Semb A, Reis S, Isaksen ISA, Tarrasón L. Evolution of NOx emissions in Europe with focus on road transport control measures. Atmospheric Chemistry and Physics. 2009;9(4):1503–1520. DOI: 10.5194/acp-9-1503-2009
• Rissler J, Swietlicki E, Bengtsson A, Boman C, Pagels J, Sandström T, et al. Experimental determination of deposition of diesel exhaust particles in the human respiratory tract. Journal of Aerosol Science. 2012;48:18–33. DOI: 10.1016/j.jaerosci.2012.01.005
• Brand C. Beyond ‘Dieselgate’: Implications of unaccounted and future air pollutant emissions and energy use for cars in the United Kingdom. Energy Policy. 2016;97:1–12. DOI: 10.1016/j.enpol.2016.06.036
• May J, Favre C, Bosteels D. Emissions from Euro 3 to Euro 6 light-duty vehicles equipped with a range of emissions control technologies. In: Internal Combustion Engines: Performance, Fuel Economy and Emissions. London: Elsevier; 2013. pp. 55–65. DOI: 10.1533/9781782421849.2.55
• Jacobs T, Assanis D, Filipi Z. The Impact of Exhaust Gas Recirculation on Performance and Emissions of a Heavy-Duty Diesel Engine. In: SAE 2003 World Congress & Exhibition. Detroit, Michigan, USA: SAE Technical Paper; 3-6 March 2003. DOI: 10.4271/2003-01-1068
• Deppenkemper K, Lng ME, Schoenen M, Koetter M. Super ultra-low NOX emissions under extended RDE conditions - evaluation of light-off strategies of advanced diesel exhaust aftertreatment systems. In: SAE Technical Paper Series. 2019. DOI: 10.4271/2019-01-0742
• Wei H, Zhu T, Shu G, Tan L, Wang Y. Gasoline engine exhaust gas recirculation – A review. Applied Energy. 2012;99:534–544. DOI: 10.1016/j.apenergy.2012.05.011
• Agarwal D, Singh SK, Agarwal AK. Effect of exhaust gas recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine. Applied Energy. 2011;88(8):2900–2907. DOI: 10.1016/j.apenergy.2011.01.066
• Resitoglu IA. NOx pollutants from diesel vehicles and trends in the control technologies. In: Richard Viskup, editor. Diesel and Gasoline Engines. IntechOpen; 2018
• Hoard J, Abarham M, Styles D, Giuliano JM, Sluder CS, Storey JME. Diesel EGR cooler fouling. SAE International Journal of Engines. 2008;1(1):1234–1250. DOI: 10.4271/2008-01-2475
• Ismail BI, Zhang R, Ewing D, Cotton JS, Chang J-S. The heat transfer characteristics of exhaust gas recirculation (EGR) cooling devices. In: Proceedings of the ASME 2002 International Mechanical Engineering Congress and Exposition. Vol. 7. New Orleans, Louisiana, USA: ASME
• 17-22 November 2002. p. 539-546. DOI: 10.1115/imece2002-39559
• Kim HM, Park SK, Choi K-S, Wang H-M, Lee DH, Lee DK, et al. Investigation on the flow and heat transfer characteristics of diesel engine EGR coolers. International Journal of Automotive Technology. 2008;9(2):149–153. DOI: 10.1007/s12239-008-0019-4
• Paz C, Suárez E, Eirís A, Porteiro J. Experimental evaluation of the critical local wall shear stress around cylindrical probes fouled by diesel exhaust gases. Experimental Thermal and Fluid Science. 2012;38:85–93. DOI: 10.1016/j.expthermflusci.2011.11.011
• Abarham M, Chafekar T, Hoard JW, Salvi A, Styles DJ, Sluder CS, et al. In-situ visualization of exhaust soot particle deposition and removal in channel flows. Chemical Engineering Science. 2012;87:359–370. DOI: 10.1016/j.ces.2012.09.025
• Lance MJ, Sluder CS, Wang H, Storey JME. Direct Measurement of EGR Cooler Deposit Thermal Properties for Improved Understanding of Cooler Fouling. In: SAE 2009 World Congress & Exhibition. Detroit, Michigan, USA: SAE Technical Paper; 20-23 April 2009. DOI: 10.4271/2009-01-1461
• Elghobashi S. On predicting particle-laden turbulent flows. Applied Scientific Research. 1994;52(4):309–329. DOI: 10.1007/bf00936835
• Teng H, Barnard M. Physicochemical characteristics of soot deposits in EGR coolers. In: SAE Technical Papers. 2010. DOI: 10.4271/2010-01-0730
• Bika AS, Warey A, Long D, Balestrino S, Szymkowicz P. Characterization of soot deposition and particle nucleation in exhaust gas recirculation coolers. Aerosol Science and Technology. 2012;46(12):1328–1336. DOI: 10.1080/02786826.2012.712730
• Eastwood P. Particulate Emissions from Vehicles. Chichester: John Wiley and Sons Ltd; 2008
• Lapuerta M, Armas O, Gómez A. Diesel particle size distribution estimation from digital image analysis. Aerosol Science and Technology. 2003;37(4):369–381. DOI: 10.1080/02786820300970
• Raza M, Chen L, Leach F, Ding S. A review of particulate number (PN) emissions from gasoline direct injection (GDI) engines and their control techniques. Energies. 2018;11(6):1417. DOI: 10.3390/en11061417
• Fushimi A, Kondo Y, Kobayashi S, Fujitani Y, Saitoh K, Takami A, et al. Chemical composition and source of fine and nanoparticles from recent direct injection gasoline passenger cars: Effects of fuel and ambient temperature. Atmospheric Environment. 2016;124:77–84. DOI: 10.1016/j.atmosenv.2015.11.017
• Maricq MM. Chemical characterization of particulate emissions from diesel engines: A review. Journal of Aerosol Science. 2007;38(11):1079–1118. DOI: 10.1016/j.jaerosci.2007.08.001
• Myung CL, Park S. Exhaust nanoparticle emissions from internal combustion engines: A review. International Journal of Automotive Technology. 2011;13(1):9–22. DOI: 10.1007/s12239-012-0002-y
• Brasil AM, Farias TL, Koylu UO, Carvalho MG. A recipe for image characterization of fractal-like aggregates. Journal of Aerosol Science. 1998;29:S1275–S1276. DOI: 10.1016/s0021-8502(98)90820-5
• Hong K, Park J, Lee K. Experimental evaluation of SOF effects on EGR cooler fouling under various flow conditions. International Journal of Automotive Technology. 2011;12(6):813–820. DOI: 10.1007/s12239-011-0093-x
• Lance MJ, Sluder S, Lewis S, Storey J. Characterization of field-aged EGR cooler deposits. SAE International Journal of Engines. 2010;3(2):126–136. DOI: 10.4271/2010-01-2091
• Lee J, Min K. A study of the fouling characteristics of EGR coolers in diesel engines. Journal of Mechanical Science and Technology. 2014;28(8):3395–3401. DOI: 10.1007/s12206-014-0752-8
• Lee Y, Hong KS, Song S, Chun KM, Lee KS, Min S, et al. Evaluation of SOF effects on deposit characteristics of the EGR cooler using a PM generator. In: SAE Technical Papers. 2011. DOI: 10.4271/2011-01-1156
• Salvi A, Hoard J, Bieniek M, Abarham M, Styles D, Assanis D. Effect of volatiles on soot based deposit layers. Journal of Engineering for Gas Turbines and Power. 2014;136(11):111401. DOI: 10.1115/1.4027460
• Young J, Leeming A. A theory of particle deposition in turbulent pipe flow. Journal of Fluid Mechanics. 1997;340:129–159. DOI: 10.1017/s0022112097005284
• Abarham M, Hoard J, Assanis D, Styles D, Curtis EW, Ramesh N. Review of soot deposition and removal mechanisms in EGR coolers. SAE International Journal of Fuels and Lubricants. 2010;3(1):690–704. DOI: 10.4271/2010-01-1211
• Chunhong He GA. Particle deposition with thermophoresis in laminar and turbulent duct flows. Aerosol Science and Technology. 1998;29(6):525–546. DOI: 10.1080/02786829808965588
• Epstein N. Elements of particle deposition onto nonporous solid surfaces parallel to suspension flows. Experimental Thermal and Fluid Science. 1997;14(4):323–334. DOI: 10.1016/S0894-1777(96)00135-5
• Talbot L, Cheng RK, Schefer RW, Willis DR. Thermophoresis of particles in a heated boundary layer. Journal of Fluid Mechanics. 1980;101(4):737–758. DOI: 10.1017/s0022112080001905
• Mulenga MC, Chang DK, Tjong JS, Styles D. Diesel EGR cooler fouling at freeway cruise. In: SAE Technical Paper Series. 2009. DOI: 10.4271/2009-01-1840
• Lance MJ, Storey J, Sluder CS, Meyer Iii H, Watkins B, Kaiser M, et al. Microstructural analysis of deposits on heavy-duty EGR coolers. In: SAE Technical Papers. Vol. 2. 2013. DOI: 10.4271/2013-01-1288
• Cleaver JW, Yates B. Mechanism of detachment of colloidal particles from a flat substrate in a turbulent flow. Journal of Colloid and Interface Science. 1973;44(3):464–474. DOI: 10.1016/0021-9797(73)90323-8
• Warey A, Bika AS, Long D, Balestrino S, Szymkowicz P. Influence of water vapor condensation on exhaust gas recirculation cooler fouling. International Journal of Heat and Mass Transfer. 2013;65(0):807–816. DOI: 10.1016/j.ijheatmasstransfer.2013.06.063
• Warey A, Bika AS, Vassallo A, Balestrino S, Szymkowicz P. Combination of pre-EGR cooler oxidation catalyst and water vapor condensation to mitigate fouling. SAE International Journal of Engines. 2014;7(1):21–31. DOI: 10.4271/2014-01-0636
• Abd-Elhady MS, Malayeri MR. Asymptotic characteristics of particulate deposit formation in exhaust gas recirculation (EGR) coolers. Applied Thermal Engineering. 2013;60(1–2):96–104. DOI: 10.1016/j.applthermaleng.2013.06.038
• Epstein N. Particulate fouling of heat transfer surfaces: Mechanisms and models. In: Melo LF, Boot TR, Bernardo CA, editors. Fouling Science and Technology. Dordrecht: Springer; 1988. pp. 143-164. DOI: 10.1007/978-94-009-2813-8_10
• Freeman WB, Middis J, Müller-Steinhagen HM. Influence of augmented surfaces and of surface finish on particulate fouling in double pipe heat exchangers. Chemical Engineering and Processing: Process Intensification. 1990;27(1):1–11. DOI: 10.1016/0255-2701(90)85001-K
• Paz C, Suárez E, Concheiro M, Porteiro J. Experimental study of soot particle fouling on ribbed plates: Applicability of the critical local wall shear stress criterion. Experimental Thermal and Fluid Science. 2013;44(0):364–373. DOI: 10.1016/j.expthermflusci.2012.07.008
• Tang S-Z, Wang F-L, Ren Q, He Y-L. Fouling characteristics analysis and morphology prediction of heat exchangers with a particulate fouling model considering deposition and removal mechanisms. Fuel. 2017;203:725–738. DOI: 10.1016/j.fuel.2017.03.049
• Abarham M, Hoard J, Assanis D, Styles D, Sluder C, Storey J. An analytical study of thermophoretic particulate deposition in turbulent pipe flows. Aerosol Science and Technology. 2010;44(44):785–795. DOI: 10.1080/02786826.2010.491841
• Garrido Gonzalez N, Baar R, Drueckhammer J, Kaeppner C. The thermodynamics of exhaust gas condensation. SAE International Journal of Engines. 2017;10(4):1411-1421. DOI: 10.4271/2017-01-9281
• Harris SJ, Maricq MM. The role of fragmentation in defining the signature size distribution of diesel soot. Journal of Aerosol Science. 2002;33(6):935–942. DOI: 10.1016/S0021-8502(02)00045-9
• McKinley TL. Modeling sulfuric acid condensation in diesel engine EGR coolers. In: SAE Technical Papers. 1997. DOI: 10.4271/970636
• Sharma M, Laing P, Son S. Modeling water condensation in exhaust A/T devices. In: SAE Technical Paper Series. 2010. DOI: 10.4271/2010-01-0885
• Ismail B. The Heat Transfer and the Soot Deposition Characteristics in Diesel Engine Exhaust Gas Recirculation Cooling Devices [thesis]. Hamilton: McMaster University; 2004
• Abarham M, Hoard J, Assanis D, Styles D, Curtis EW, Ramesh N, et al. Numerical modeling and experimental investigations of EGR cooler fouling in a diesel engine. In: SAE 2009 World Congress & Exhibition. Detroit, Michigan, USA: SAE Technical Paper; 20-23 April 2009. DOI: 10.4271/2009-01-1506
• Abarham M, Hoard J, Assanis DN, Styles D, Curtis EW, Ramesh N, et al. Modeling of thermophoretic soot deposition and hydrocarbon condensation in EGR coolers. SAE International Journal of Fuels and Lubricants. 2009;2:921–931. DOI: 10.4271/2009-01-1939
• Teng H, Regner G. Characteristics of soot deposits in EGR coolers. Society of Automotive Engineers. 2009;01–2671(2):81–90. DOI: 10.4271/2009-01-2671
• Teng H, Regner G. Particulate fouling in EGR coolers. SAE International Journal of Commercial Vehicles. 2010;2(2):154–163. DOI: 10.4271/2009-01-2877
• Teng H. A semi-empirical model for predicting pressure drops of fouled EGR coolers. SAE International Journal of Commercial Vehicles. 2010;3(1):156–163. DOI: 10.4271/2010-01-1948
• Mehravaran M, Brereton G. Modeling of Thermophoretic Soot Deposition and Stabilization on Cooled Surfaces. In: Commercial Vehicle Engineering Congress. Rosemont, Chicago, Illinois, USA: SAE Technical Paper; 13-14 September 2011. DOI: 10.4271/2011-01-2183
• Reza Razmavar A, Reza Malayeri M. A simplified model for deposition and removal of soot particles in an exhaust gas recirculation cooler. Journal of Engineering for Gas Turbines and Power. 2016;138(1):011505. DOI: 10.1115/1.4031180
• Sul H, Han T, Bieniek M, Hoard J, Kuan C-K, Styles D. The effects of temperature, shear stress, and deposit thickness on EGR cooler fouling removal mechanism - part 2. SAE International Journal of Materials and Manufacturing. 2016;9(2016–01–0186):245–253. DOI: 10.4271/2016-01-0186
• Kuan C-K, Styles D, Bieniek M, Hoard J. An EGR cooler fouling model: Experimental correlation and model uses. SAE International Journal of Engines. 2017;10(2):541–549. DOI: 10.4271/2017-01-0535
• Warey A, Balestrino S, Szymkowicz P, Malayeri MR. A one-dimensional model for particulate deposition and hydrocarbon condensation in exhaust gas recirculation coolers. Aerosol Science and Technology. 2012;46(2):198–213. DOI: 10.1080/02786826.2011.617400
• Housiadas C, Drossinos Y. Thermophoretic deposition in tube flow. Aerosol Science and Technology. Apr. 2005;39(4):304–318. DOI: 10.1080/027868290931069
• Kern DQ, Seaton RE. A theoretical analysis of thermal surface fouling. British Chemical Engineering. 1959;4(5):258–262
• Mohammadi K, Malayeri MR. Model-based performance of turbulence induced structures in exhaust gas recirculation (EGR) coolers. Heat Transfer Engineering. 2014;36(7–8):706–714. DOI: 10.1080/01457632.2015.954949
• Xu Z, Sun A, Han Z, Yu X, Zhang Y. Simulation of particle deposition in a plate-fin heat exchanger using a particle deposition model with a random function method. Powder Technology; 2019;355:145-156. DOI: 10.1016/j.powtec.2019.07.031
• Nagendra K, Tafti DK, Viswanathan AK. Modeling of soot deposition in wavy-fin exhaust gas recirculator coolers. International Journal of Heat and Mass Transfer. 2011;54(7–8):1671–1681. DOI: 10.1016/j.ijheatmasstransfer.2010.10.033
• Yang B-J, Mao S, Altin O, Feng Z-G, Michaelides EE. Condensation analysis of exhaust gas recirculation system for heavy-duty trucks. Journal of Thermal Science and Engineering Applications. 2011;3(4):041007. DOI: 10.1115/1.4004745
• Golçalves Guedes de Pinho Guerra, Sara Raquel. Fouling of Exhaust Gas Recirculation Coolers [thesis]. Porto: Universidade do Porto; 2017
• Paz C, Suárez E, Eirís A, Porteiro J. Development of a predictive CFD fouling model for diesel engine exhaust gas systems. Heat Transfer Engineering. 2013;34(8–9):674–682. DOI: 10.1080/01457632.2012.738321
• Abarham M, Zamankhan P, Hoard JW, Styles D, Sluder CS, Storey JME, et al. CFD analysis of particle transport in axi-symmetric tube flows under the influence of thermophoretic force. International Journal of Heat and Mass Transfer. 2013;61(0):94–105. DOI: 10.1016/j.ijheatmasstransfer.2013.01.071
• Paz C, Suárez E, Conde M, Vence J. Development of a computational fluid dynamics model for predicting fouling process using dynamic mesh model. Heat Transfer Engineering. 2020;41(2):199-207. DOI: 10.1080/01457632.2018.1522108
• Paz C, Suárez E, Vence J, Cabarcos A. Fouling evolution on ribbed surfaces under EGR dry soot conditions: Experimental measurements and 3D model validation. International Journal of Thermal Sciences. 2020;151:106271. DOI: 10.1016/j.ijthermalsci.2020.106271
• Paz C, Suárez E, Vence J, Gil C. CFD study of the fouling layer evolution due to soot deposition and hydrocarbon condensation inside an exhaust gas recirculation cooler. In: 13th International Conference on Heat Exchanger Fouling and Cleaning. 2019