Enxeñaría dos materiais, mecánica aplicada e construción

2012

1. A novel methodology for the structural assessment of stone arches based on geometric data by integration of photogrammetry and ground-penetrating radar

   Engineering Structures, Vol. 35, pp. 296-306

2. An innovative method for remote measurement of minimum vertical underclearance in routine bridge inspection

   Automation in Construction, Vol. 25, pp. 34-40

3. Aplicación del "design-for-assembly" en el desarrollo de una nuevo chasis para armarios de distribución eléctrica

   Revista DYNA, Vol. 87, Núm. 2, pp. 169-179

4. Biological hydroxyapatite obtained from fish bones

   Materials Science and Engineering C, Vol. 32, Núm. 3, pp. 478-486

5. Chromium and tantalum oxide nanocoatings prepared by filtered cathodic arc deposition for corrosion protection of carbon steel

   Surface and Coatings Technology, Vol. 206, Núm. 19-20, pp. 3903-3910

6. Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloy

   Wear, Vol. 276-277, pp. 53-60

7. Experimental forensic scenes for the characterization of ground-penetrating radar wave response

   Forensic Science International, Vol. 220, Núm. 1-3, pp. 50-58

8. Experimental study on the CO 2 laser cutting of carbon fiber reinforced plastic composite

   Composites Part A: Applied Science and Manufacturing, Vol. 43, Núm. 8, pp. 1400-1409

9. Influence of molybdenum ion implantation on the localized corrosion resistance of a high strength aluminium alloy

   Corrosion Science, Vol. 54, Núm. 1, pp. 143-152

10. Laser surface melting: A suitable technique to repair damaged surfaces made in 14 Ni (200 grade) maraging steel

    Surface and Coatings Technology, Vol. 212, pp. 159-168

11. Photogrammetry and laser scanner technology applied to length measurements in car testing laboratories

    Measurement: Journal of the International Measurement Confederation, Vol. 45, Núm. 3, pp. 354-363

12. Procedure to evaluate the accuracy of laser-scanning systems using a linear precision electro-mechanical actuator

    IET Science, Measurement and Technology, Vol. 6, Núm. 1, pp. 6-12

13. Thermal properties measurement of slate using laser flash method

    Optics and Lasers in Engineering, Vol. 50, Núm. 5, pp. 727-730

14. Tribological behaviour of aluminium alloy AA7075 after ion implantation

    Surface and Coatings Technology, Vol. 209, pp. 124-130

15. Verification of image orthorectification techniques for low-cost geometric inspection of masonry arch bridges

    Optical Engineering, Vol. 51, Núm. 7