Enxeñaría dos materiais, mecánica aplicada e construción

2018

1. An example of company-university cooperation: mathematical modeling and numerical simulation of heat dissipation in led bulbs

   XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

2. Analysis of the shear behavior of structural metal joints based on the use of girder clamps

   Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials 11th National Congress on Experimental Mechanics (Porto/Portugal, 4-7 November 2018): TEMM2018 CNME2018 (INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial), pp. 705-710

3. Application of MLS data to the assessment of safety-related features in the surrounding area of automatically detected pedestrian crossings

   International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

4. Automated calibration of fem models using LiDAR point clouds

   International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

5. Automated detection and decomposition of railway tunnels from Mobile Laser Scanning Datasets

   Automation in Construction, Vol. 96, pp. 171-179

6. Automatic extraction of road features in urban environments using dense ALS data

   International Journal of Applied Earth Observation and Geoinformation, Vol. 64, pp. 226-236

7. Automatic parametrization and shadow analysis of roofs in urban areas from ALS point clouds with solar energy purposes

   ISPRS International Journal of Geo-Information, Vol. 7, Núm. 8

8. Automatic parametrization of urban areas using ALS data: The case study of santiago de compostela

   ISPRS International Journal of Geo-Information, Vol. 7, Núm. 11

9. Caracterización físico-química de asfalto modificado con polímero empleado en la fabricación de cubiertas impermeabilizantes.

   Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials 11th National Congress on Experimental Mechanics (Porto/Portugal, 4-7 November 2018): TEMM2018 CNME2018 (INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial), pp. 595-604

10. Corbelled dome buildings of the Gerês-Xurés transborder region: Methodologies and characterization

    Conservar Patrimonio, Vol. 28, pp. 39-48

11. Detection of structural faults in piers of masonry arch bridges through automated processing of laser scanning data

    Structural Control and Health Monitoring, Vol. 25, Núm. 3

12. EIS as a tool to characterize nanostructured iron fluoride conversion layers for Li-ion batteries

    Bulgarian Chemical Communications, Vol. 50, pp. 82-89

13. EIS study of epoxy resin applied on carbon steel using double-cylinder electrolyte cell

    Progress in Organic Coatings, Vol. 124, pp. 275-285

14. Electrochemical behaviour of passive layers in weathered reinforced mortars

    6th International Conference on Durability of Concrete Structures, ICDCS 2018

15. Fabricación de cubiertas impermeabilizantes a partir de material reciclado

    Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials 11th National Congress on Experimental Mechanics (Porto/Portugal, 4-7 November 2018): TEMM2018 CNME2018 (INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial), pp. 809-816

16. First results on the combination of laser scanner and drilling resistance tests for the assessment of the geometrical condition of irregular cross-sections of timber beams

    Materials and Structures/Materiaux et Constructions, Vol. 51, Núm. 4

17. Friction stir processing strategies to develop a surface composite layer on AA6061-T6

    Materials and Manufacturing Processes, Vol. 33, Núm. 10, pp. 1133-1140

18. Hemodynamic Changes in the Treatment of Multiple Intracranial Aneurysms: A Computational Fluid Dynamics Study

    World Neurosurgery, Vol. 118, pp. e631-e638

19. Laser cutting using off-axial supersonic rectangular nozzles

    Precision Engineering, Vol. 51, pp. 78-87

20. Laser direct writing of Co-superalloy lines for micro-fabrication applications

    Surface and Coatings Technology, Vol. 345, pp. 76-88