CINTECX

2023

1. 3D printing of PLA:CaP:GO scaffolds for bone tissue applications

   RSC Advances, Vol. 13, Núm. 23, pp. 15947-15959

2. A Benchmarking of Commercial Small Fixed-Wing Electric UAVs and RGB Cameras for Photogrammetry Monitoring in Intertidal Multi-Regions

   Drones, Vol. 7, Núm. 10

3. A Carrier-Based Overmodulation Strategy With Minimum Voltage Distortion for Symmetrical n-Phase Induction Motor Drives

   IEEE Transactions on Power Electronics, Vol. 38, Núm. 12, pp. 15055-15071

4. A Fully Discrete Approximation of a New Two-Temperature Thermoelastic Model

   Numerical Functional Analysis and Optimization, Vol. 44, Núm. 10, pp. 1044-1059

5. A New Insight into the Stability of Precariously Balanced Rocks

   Rock Mechanics and Rock Engineering, Vol. 56, Núm. 5, pp. 3539-3550

6. A combined experimental and theoretical approach effect of Curcuma. L extract as a corrosion inhibitor on iron in acidic solution

   Canadian Metallurgical Quarterly

7. A discordance analysis in manual labelling of urban mobile laser scanning data used for deep learning based semantic segmentation

   Expert Systems with Applications, Vol. 230

8. A novel fully removable walkway system with non-invasive anchors for structural health inspection and maintenance of historic steel structures

   Structures, Vol. 53, pp. 1435-1449

9. A novel low-cost multi-sensor solution for pavement distress segmentation and characterization at night

   International Journal of Applied Earth Observation and Geoinformation, Vol. 120

10. AC-Voltage Controller for Grid-Forming Converters

    IEEE Transactions on Power Electronics, Vol. 38, Núm. 4, pp. 4529-4543

11. Activity and stability of bifunctional perovskite/carbon-based electrodes for the removal of antipyrine by electro-Fenton process

    Chemosphere, Vol. 334

12. Advanced Hybrid System for Ammonium Valorization as Liquid Fertilizer from Treated Urban Wastewaters: Validation of Natural Zeolites Pretreatment and Liquid-Liquid Membrane Contactors at Pilot Plant Scale

    Membranes, Vol. 13, Núm. 6

13. Ammonia recovery from municipal wastewater using hybrid NaOH closed-loop membrane contactor and ion exchange system

    Chemical Engineering Journal, Vol. 465

14. An a priori error analysis of a type III thermoelastic problem with two porosities

    Numerical Methods for Partial Differential Equations, Vol. 39, Núm. 2, pp. 1067-1084

15. Analysis of pigments and mortars from the wall paintings of the Roman archaeological site of Las Dunas (San Pedro de Alcántara, Malaga S Spain)

    Journal of Archaeological Science: Reports, Vol. 52

16. Analysis of the local growth and density evolution of soot deposits generated under hydrocarbon condensation: 3D simulation and detailed experimental validation

    Results in Engineering, Vol. 18

17. Analysis of the oscillations induced by a supersonic jet applied to produce nanofibers

    International Journal of Mechanical Sciences, Vol. 238

18. Anticipating the Collapse of Urban Infrastructure: A Methodology Based on Earth Observation and MT-InSAR

    Remote Sensing, Vol. 15, Núm. 15

19. Análisis mediante redes neuronales del perfil energético de una prensa de conformado de chapa en el sector de la automoción

    Revista iberoamericana de ingeniería mecánica, Vol. 27, Núm. 2, pp. 17-33

20. Application of Deep Eutectic Solvents (DES) for the Synthesis of Iron Heterogeneous Catalyst: Application to Sulfamethoxazole Degradation by Advanced Oxidation Processes

    Catalysts, Vol. 13, Núm. 4