Centre d'investigació
CINTECX
Publicacions (74) Publicacions en què ha participat algun/a investigador/a
2024
-
A Generalized Overmodulation Strategy With Minimum Current Distortion for Symmetrical and Asymmetrical Multiphase Induction Motor Drives
IEEE Transactions on Power Electronics, Vol. 39, Núm. 6, pp. 6552-6567
-
A comprehensive structural and electrochemical study on the performance of Mn-phosphate layers
Surface and Coatings Technology, Vol. 476
-
Advancing in wastewater treatment using sustainable electrosorbents
Current Opinion in Electrochemistry, Vol. 44
-
Analysis of structural integrity through the combination of non-destructive testing techniques in heritage inspections: The study case of San Segundo's hermitage (Ávila, Spain)
Journal of Building Engineering, Vol. 89
-
Analysis of the GPR signal for moisture detection: application to heritage buildings
International Journal of Architectural Heritage, Vol. 18, Núm. 2, pp. 230-253
-
Analysis of the Mechanical Behaviour of an Innovative Removable Clamps-Based Connection System for Steel Square and Rectangular Profiles
International Journal of Civil Engineering, Vol. 22, Núm. 4, pp. 581-596
-
Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face
Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4
-
Anomalous twin boundary formation in magnesium alloys by rapid solidification
Acta Materialia, Vol. 272
-
Application of supervised learning algorithms for temperature prediction in nucleate flow boiling
Applied Thermal Engineering, Vol. 240
-
Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment
Rock Mechanics and Rock Engineering
-
Assessment of physical pre-treatments for the recovery of biosurfactants in corn steep water prior to advanced membrane-based water treatment
Journal of Water Process Engineering, Vol. 60
-
Automated Detection of Rust Defects from 3D Point Cloud Data Through Machine Learning
Lecture Notes in Mechanical Engineering
-
Automated production of synthetic point clouds of truss bridges for semantic and instance segmentation using deep learning models
Automation in Construction, Vol. 158
-
Automatic Characterization of Block-In-Matrix Rock Outcrops through Segmentation Algorithms and Its Application to an Archaeo-Mining Case Study
Geosciences (Switzerland), Vol. 14, Núm. 2
-
Automatic differentiation of Eucalyptus species through Sentinel-2 images, Worldview-3 images and LiDAR data
ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 207, pp. 264-281
-
Bio-Adsorbent-Based integrated system
Biodegradation of Toxic and Hazardous Chemicals: Remediation and Resource Recovery (CRC Press), pp. 58-79
-
Biodegradation of toxic and hazardous chemicals: Detection and mineralization
CRC Press, pp. 1-188
-
Biodegradation of toxic and hazardous chemicals: Remediation and resource recovery
CRC Press, pp. 1-181
-
Characterization Using Point Defect Theory of the Microstructure Effect on Passivity Stability in Austenitic Stainless Steel
Corrosion, Vol. 80, Núm. 3, pp. 300-315
-
Comparative Evaluation of LiDAR systems for transport infrastructure: case studies and performance analysis
European Journal of Remote Sensing, Vol. 57, Núm. 1