Publikationen (74) Publikationen, an denen Forscher/innen teilgenommen haben

2024

  1. A Generalized Overmodulation Strategy With Minimum Current Distortion for Symmetrical and Asymmetrical Multiphase Induction Motor Drives

    IEEE Transactions on Power Electronics, Vol. 39, Núm. 6, pp. 6552-6567

  2. A comprehensive structural and electrochemical study on the performance of Mn-phosphate layers

    Surface and Coatings Technology, Vol. 476

  3. Advancing in wastewater treatment using sustainable electrosorbents

    Current Opinion in Electrochemistry, Vol. 44

  4. Analysis of structural integrity through the combination of non-destructive testing techniques in heritage inspections: The study case of San Segundo's hermitage (Ávila, Spain)

    Journal of Building Engineering, Vol. 89

  5. Analysis of the GPR signal for moisture detection: application to heritage buildings

    International Journal of Architectural Heritage, Vol. 18, Núm. 2, pp. 230-253

  6. Analysis of the Mechanical Behaviour of an Innovative Removable Clamps-Based Connection System for Steel Square and Rectangular Profiles

    International Journal of Civil Engineering, Vol. 22, Núm. 4, pp. 581-596

  7. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

  8. Anomalous twin boundary formation in magnesium alloys by rapid solidification

    Acta Materialia, Vol. 272

  9. Application of supervised learning algorithms for temperature prediction in nucleate flow boiling

    Applied Thermal Engineering, Vol. 240

  10. Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment

    Rock Mechanics and Rock Engineering

  11. Assessment of physical pre-treatments for the recovery of biosurfactants in corn steep water prior to advanced membrane-based water treatment

    Journal of Water Process Engineering, Vol. 60

  12. Automated Detection of Rust Defects from 3D Point Cloud Data Through Machine Learning

    Lecture Notes in Mechanical Engineering

  13. Automated production of synthetic point clouds of truss bridges for semantic and instance segmentation using deep learning models

    Automation in Construction, Vol. 158

  14. Automatic Characterization of Block-In-Matrix Rock Outcrops through Segmentation Algorithms and Its Application to an Archaeo-Mining Case Study

    Geosciences (Switzerland), Vol. 14, Núm. 2

  15. Automatic differentiation of Eucalyptus species through Sentinel-2 images, Worldview-3 images and LiDAR data

    ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 207, pp. 264-281

  16. Bio-Adsorbent-Based integrated system

    Biodegradation of Toxic and Hazardous Chemicals: Remediation and Resource Recovery (CRC Press), pp. 58-79

  17. Biodegradation of toxic and hazardous chemicals: Detection and mineralization

    CRC Press, pp. 1-188

  18. Biodegradation of toxic and hazardous chemicals: Remediation and resource recovery

    CRC Press, pp. 1-181

  19. Characterization Using Point Defect Theory of the Microstructure Effect on Passivity Stability in Austenitic Stainless Steel

    Corrosion, Vol. 80, Núm. 3, pp. 300-315

  20. Comparative Evaluation of LiDAR systems for transport infrastructure: case studies and performance analysis

    European Journal of Remote Sensing, Vol. 57, Núm. 1