Sistemas de Control basados en Reset

  1. Antonio Barreiro 1
  2. Alfonso Baños 2
  1. 1 Universidade de Vigo
    info

    Universidade de Vigo

    Vigo, España

    ROR https://ror.org/05rdf8595

  2. 2 Universidad de Murcia
    info

    Universidad de Murcia

    Murcia, España

    ROR https://ror.org/03p3aeb86

Revista:
Revista iberoamericana de automática e informática industrial ( RIAI )

ISSN: 1697-7920

Ano de publicación: 2012

Volume: 9

Número: 4

Páxinas: 329-346

Tipo: Artigo

DOI: 10.1016/J.RIAI.2012.09.007 DIALNET GOOGLE SCHOLAR lock_openAcceso aberto editor

Outras publicacións en: Revista iberoamericana de automática e informática industrial ( RIAI )

Resumo

A reset control system is formed by a linear controller endowed with certain resetting mechanism, that sets to zero the state. This zeroing of some of the state coordinates is applied when certain condition holds. The condition that triggers resetting is usually the zero crossing of the tracking error. The idea of re-set control dates back to Clegg Integrator (CI) in 1958, and was adopted in the 70's by I. Horowitz, who emphasized the ability of reset systems to overcome fundamental limitations of linear systems with delays or with poles or zeros in the right half-plane. Left aside for some time, the idea was recovered in the last decade and was given a new impulse by several research teams that contribute with advances in analysis, design and application of reset control systems. This interest appears in the context of the present boom of hybrid systems: a reset system is a particular case of hybrid system that, in spite of its simplicity, enables the possibility of overcoming linear limitations. The objetive of this work is to present, in the form of a tutorial, the current panorama in the field. First, a historical review is introduced, on the three main approaches to reset control: the classical approach (based on zero-crossing of the tracking error), the impulsive approach (where reset is applied on a temporal basis) and the hybrid approach (where some sector reset condition is defined). Next, a summary of results is presented on analysis topics (relation to fundamental limitations, stability) and finally several design proposals are discussed, focused to the tuning of PI+CI compensators.

Referencias bibliográficas

  • Aangenent, W.H.T.M., G.Witvoet, W.P.M.H. Heemels, M.J.G. van de Molengraft, M. Steinbuch (2009), ”Performance analysis of reset control systems”, Int. Journal of Robust and Nonlinear Control, 20 (11), pp. 1213-1233.
  • Åström, K.J. (2000), ”Limitations on Control System Performace”, European Journal of Control, 6, pp.2-20.
  • Åström, K. J., H agglund, T. (2001), ”The future of PID control”, Control Engineering Practice, 9, 1163-1175.
  • Åström, K.J. and R.M.Murray (2008), Feedback systems. An introduction for scientists and engineers, Princeton University Press, Princeton, NJ.
  • Bainov, D. D., Simeonov (1989), Systems with impulse effect: stability, theory and applications, Ellis Horwood, Chichester.
  • Bakkeheim, J., Johansen, T. A., Smogeli, O. N., Sorensen, A. J. (2008), ”Lyapunov-based integrator resetting with application to marine thruster control”. IEEE Trans. on Control Systems Technology,16(5) 908-917.
  • Baños, A., A. Barreiro (2006), ”Delay-independent stability of reset control systems”, 32nd Annual Conference of IEEE Industrial Electronics Society, Paris, France.
  • Baños, A., A. Barreiro (2007), ”Delay dependent stability of reset control systems”, American Control Conference, New York, EE.UU.
  • Baños, A., A. Barreiro (2009), ”Delay-independent stability of reset systems”, IEEE Transactions on Automatic Control, 54 (2), 341-346.
  • Baños, A., A. Barreiro (2012), Reset control systems, Springer, Londres.
  • Baños, A., J. Carrasco, A. Barreiro (2007), Reset times-dependent stability of reset control system”, European Control Conference, Kos, Grecia.
  • Baños, A., J. Carrasco, A. Barreiro (2007), Reset times-dependent stability of reset control with unstable base systems”, IEEE International Symposium on Industrial Electronics, Vigo, España.
  • Baños, A., J, Carrasco, A. Barreiro (2011), Reset times-dependent stability of reset control systems”, IEEE Transactions on Automatic Control, 56(1), pp. 217-223.
  • Baños, A., S. Dormido, A. Barreiro (2009), ”Stability analysis of reset control systems with reset band”, 3rd IFAC Conference on Analysis and Design of Hybrid Systems, Zaragoza, España.
  • Baños, A., A. Barreiro, S. Dormido (2010), ”Limit cycles analysis in reset systems with reset band”, Nonlinear analysis:hybrid systems, doi:10.1016/j.nahs.2010.07.004.
  • Baños, A., J. I. Mulero (2012), On the well-posedness of reset control systems, Abstract and Applied Analysis.
  • Baños, A., A. Vidal (2007), ”Definition and tuning of PI +CI reset controller”, European Control Conference, Kos, Grecia.
  • Baños, A., A. Vidal (2007), ”Design of PC +CI reset compensators for second order plants”, IEEE International Symposium on Industrial Electronics, Vigo, España.
  • Barreiro, A., A. Baños, (2010), ”Delay-dependent stability of reset systems”, Automatica, 46 (1), pp. 216-221.
  • Barreiro, A., A. Baños, S. Dormido(2011), Reset control systems with reset band: well-posedness and limit cycle analysis”, 19th Mediterranean Control Conference, 20-23 June 2011, Corfu, Greece.
  • Beker, O., (2001), Analysis of reset control systems, Ph. D. Thesis, University of Massachusetts Amherst.
  • Beker, O, C.V. Hollot, Y. Chait and H. Han, (2001). ”Plant with integrator: an example of reset control overcoming limitations of linear systems”. IEEE Trans. on Autom. Control, 46(11), pp. 1797-1799.
  • Beker, O, C.V. Hollot, Y. Chait and H. Han, (2004). ”Fundamental properties of reset control systems”. Automatica, 40, pp. 905-915.
  • Carrasco, J., A. Baños A. and A.J. van der Schaft, (2010) A passivity-based approach to reset control systems stabillity Systems and Control Letters, Vol. 59(1), pp.18-24.
  • Chait Y. and C. Hollot, (2002) On Horowitz’s contributions to reset control International Journal of Robust and Nonlinear Control, Vol. 12(4), 335-355.
  • Clegg, J.C. (1958), A nonlinear integrator for servomechanism, Transactions A.I.E.E.m, Part II, 77, pp. 41-42.
  • Fernández-Villaverde, A., A. Barreiro, J. Carrasco y A. Baños, Reset control for passive bilateral teleoperation”, IEEE Transactions on Industrial Electronics, 58(7), pp. 3037 - 3045.
  • Goebel, R., R. Sanfelice, and A.R. Teel (2009). ”Hybrid dynamical systems”. IEEE Control Systems Magazine.
  • Guo Y. Wang Y., Xie L., (2009), ”Frequency-domain properties of reset systems with application in hard-disk-drive systems”, IEEE Trans. on Control Systems Technology, 17(6) 1446-1453.
  • Guo Y., Wang Y., Xie L., and Zheng, J. (2009), ”Stability analysis and design of reset systems: Theory and an application”, Automatica, 45 (2), pp. 492-497.
  • Guo Y., W. Gui, Ch. Yang, L. Xie (2010), ”Stability analysis and design of reset control systems with discrete-time triggering conditions”, Automatica, 48, pp. 528-535.
  • Guo Y., Y. Wang y L. Xie (2010), Robust stability of reset control systems with uncertain output matrix”, doi:10.1016/j.automatica.2012.05.62.
  • Haddad, W.M., VS Chellaboina and S.G. Nersesov (2006), Impulsive and hybrid dynamical systems. Stability, dissipativity and control, Princeton University Press, Princeton NJ.
  • Horowitz, I. M. and P. Rosenbaum (1975), ”Nonlinear design for cost of feedback reduction in systems with large parameter uncertainty”, Int. Journal of Control, 24 (6), pp. 977-1001.
  • Krishnan, K.R, and Horowitz, I. M. (1974), ”Synthesis of a nonlinear feedback system with significant plant-ignorance for prescribed system tolerances”, International Journal of Control, 19 (4), pp. 689-706.
  • Lakshmikantham,V., D.D.Bainov and P.S.Simeonov (1989), Theory of impulsive differential equations, World Scientific, Singapore.
  • Loquen T., S. Tarbouriech, Ch. Prieur (2008), ”Stability of reset control systems with nonzero reference”, Proceedings of the 47th IEEE Conf. on Decision and Control, Cancun, Mexico.
  • Nesic D., L. Zaccarian and A.R. Teel (2008). ”Stability properties of reset systems”. Automatica, 44 (8), pp. 2019-2026.
  • Nesic D., A.R. Teel, L. Zaccarian (2011). ”Stability and performance of SISO control system with FORE”. IEEE TAC, 56(11) 2567-2582.
  • D. Paesa, A. Baños, C. Sagues. (2011) ’Optimal reset adaptive observer design, Systems and Control Letters, 60(10):877-883.
  • Paesa, D., C. Franco, S. Llorente, G. Lopez-Nicolas, C. Sagues (2012) Reset adaptive observer for a class of nonlinear systems”. IEEE Trans. on Autom. Control, 57(2),506-511.
  • Skogestad, S. (2003), ”Simple analytic rules for model reduction and PID controller tuning”, Journal of Process Control, 13 (4), pp. 291-309.
  • Smith, C. L., Corripio, A. B., Martin, J. (1975), C¸ ontroller tuning from simple process models”, Instrumentation Technology, 22 (12), pp. 39-44.
  • Tarbouriech,S., T.Loquen, C.Prieur (2011) .Anti-windup strategy for reset control systems”, Int. J. of Robust and Nonlinear Control, 21(10)1159-77.
  • Vidal, A., Baños, A., Moreno, J. C., Berenguel, M. (2008), ”PI +CI compensation with variable reset: application on solar collector fields”, 34th Annual Conf. of the IEEE Industrial Electronics Society, Orlando, Florida, EE.UU.
  • Vidal, A., Baños, A. (2008) ”QFT-based design fo PI +CI reset compensator: applications in process control”, 16th IEEE Mediterranean Conference on Control and Automation, Ajaccio, Francia.
  • Vidal, A., Baños, A. (2009), ”Stability of reset control systems with variable reset: application to PI+CI compensation”, European Control Conference, Budapest, Hungary.
  • Vidal, A., Baños, A. (2009), Reset compensation applied on industrial heat exchangers”, 14th IEEE International Conference on Emerging Technologies and Factory Automation, Mallorca, España.
  • Vidal, A., A. Baños (2010). Reset compensation for temperature control: experimental applications on heat exchangers. Chemical Engineering Journal, 159 (1-3), pp. 170-181.
  • Wu, D., Guo, G., Wang, Y. (2007), Reset Integral-Derivative Control for HDD servo systems”. IEEE Transactions on Control Systems Technology, 15 (1), 161-167.
  • Yang, T., (2001), Impulsive Control Theory , Lecture Notes in Control and Information Sciences, 272. Springer, Berlin.
  • Zaccarian, L., D. Nesic, and A. R. Teel (2005), First order reset elements and ´ the Clegg integrator revisited Proc. American Control Conference, 1, 563- 568.
  • Zheng, Y., Chait, Y., Hollot, C. V., Steinbuch, M., Norg, M. (2000), ’Experimental demonstration of reset control design’. Control Eng. Practice 8(2) 113-120.
  • Zheng J., Y. Guo, M. Fu, Y. Wang, L. Xie (2007), Improved reset control design for a PZT positioning stage, Proceedings of the 16th IEEE Int. Conf. on Control Applications, Singapore.
  • Zheng, J., Guo, Y., Fu, M., Wang, Y., Xie, L. (2008), Development of an extended reset controller and its experimental demonstration, IET Control Theory and Applications, 2, 866-874.
  • Zheng, J. Fu, M., (2010), A reset state estimator using an accelerometer for enhanced motion control with sensor quantization IEEE Trans. on Control Systems Technology, 18(1) 79-90.
Fonte de datos: Dialnet