REDE - Research Group in Energy, Innovation and Environment
EA3
![Foto de REDE - Research Group in Energy, Innovation and Environment](/img/grupo.png)
![Foto de Universidade de Aveiro](/img/noimage_org.png)
Universidade de Aveiro
Aveiro, PortugalPublications in collaboration with researchers from Universidade de Aveiro (21)
2020
-
Autonomous Robots and CoBots: Applications in Manufacturing
Enabling Technologies for the Successful Deployment of Industry 4.0 (CRC Press), pp. 47-66
2019
-
Enhancing Productivity by Means of High Feed Rate in the Drilling of Al 2011 Aluminium Alloy
Arabian Journal for Science and Engineering, Vol. 44, Núm. 9, pp. 8035-8042
-
Facing the challenges of the food industry: Might additive manufacturing be the answer?
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 233, Núm. 8, pp. 1902-1906
-
Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions
Procedia Manufacturing
-
Machining of a biomaterial with dual negative tool geometry
Mechanical Behaviour of Biomaterials (Elsevier), pp. 117-128
2018
-
A novel method for the determination of fatty acid esters in aqueous emulsion on Ti6Al4V surface with IRRAS and carbon quantification
Tribology International, Vol. 128, pp. 155-160
-
Surface quality enhancement of fused deposition modeling (FDM) printed samples based on the selection of critical printing parameters
Materials, Vol. 11, Núm. 8
2017
-
Latest advances in the micro-milling of titanium alloys: a review
Procedia Manufacturing, Vol. 13, pp. 275-282
-
Study Based on Sound Monitoring as a Means for Superficial Quality Control in Intermittent Turning of Magnesium Workpieces
Procedia CIRP
-
Technical, Economic and Environmental Review of the Lubrication/Cooling Systems Used in Machining Processes
Procedia Engineering
2016
-
Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 38, Núm. 8, pp. 2413-2420
-
Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics: Assessing the influence of the temperature of the drill
Journal of Composite Materials, Vol. 50, Núm. 2, pp. 179-189
-
Delamination of carbon fiber reinforced plastics: Analysis of the drilling method
Indian Journal of Engineering and Materials Sciences, Vol. 23, Núm. 2-3, pp. 134-138
-
Surface Roughness Investigation in the Hard Turning of Steel Using Ceramic Tools
Materials and Manufacturing Processes, Vol. 31, Núm. 5, pp. 648-652
-
The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals
Measurement: Journal of the International Measurement Confederation, Vol. 94, pp. 338-343
2015
-
A note on the use of the minimum quantity lubrication (MQL) system in turning
Industrial Lubrication and Tribology, Vol. 67, Núm. 3, pp. 256-261
-
Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229, Núm. 2, pp. 365-371
-
Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hardened AISI H13 steel
International Journal of Advanced Manufacturing Technology, Vol. 81, Núm. 9-12, pp. 1591-1599
2014
-
Discontinuous cutting: Failure mechanisms, tool materials and temperature study - A review
Reviews on Advanced Materials Science, Vol. 38, Núm. 2, pp. 110-124
-
Experimental investigation on finish intermittent turning of UNS M11917 magnesium alloy under dry machining
International Journal of Advanced Manufacturing Technology, Vol. 75, Núm. 9-12, pp. 1417-1429