Publicacións (385) Publicacións nas que participase algún/ha investigador/a

2024

  1. A numerical procedure for calculating roughness parameters for the Greenwood-Tripp model of asperity contact based on 3D measurements

    Tribology International, Vol. 200

  2. Advanced approach for assessing the degradation of railway ballast particles through detailed 3D scanning

    Construction and Building Materials, Vol. 436

  3. Application of supervised learning algorithms for temperature prediction in nucleate flow boiling

    Applied Thermal Engineering, Vol. 240

  4. Assessment of the Effective Sensitivity of SARS-CoV-2 Sample Pooling Based on a Large-Scale Screening Experience: Retrospective Analysis

    JMIR public health and surveillance, Vol. 10, pp. e54503

  5. Characterization of the ozone effect on a scraped off fouling sample

    Powder Technology, Vol. 445

  6. Definition, estimation and decoupling of the overall uncertainty of the outdoor air temperature measurement surrounding a building envelope

    Journal of Building Physics

  7. Eulerian CFD simulation of biomass thermal conversion in an indirect slow pyrolysis rotary kiln unit to produce biochar from recycled waste wood

    Energy, Vol. 288

  8. Experimental data review for boiling incipience at subcooled flow boiling and new dimensionless correlation

    International Journal of Heat and Mass Transfer, Vol. 233

  9. Geostrategic study of the evolution of energy harvesting systems based on the patent activity of flywheels and regenerative shock absorbers

    Energy Reports, Vol. 12, pp. 1777-1793

  10. Growth analysis of the particle layer in a small-scale ESP with biomass combustion

    Journal of Electrostatics, Vol. 127

  11. Integrating Renewable Energy Produced by a Library Building on a University Campus in a Scenario of Collective Self-Consumption

    Energies, Vol. 17, Núm. 14

  12. Measurement uncertainty and behaviour analysis of indoor air quality variables of thermal zones of an in-use mechanically ventilated building

    Building and Environment, Vol. 254

  13. Modeling and optimization of triple tube heat exchangers. Theoretical formulation, CFD model and experimental contrast

    Thermal Science and Engineering Progress, Vol. 52

  14. NSGA-II based short-term building energy management using optimal LSTM-MLP forecasts

    International Journal of Electrical Power and Energy Systems, Vol. 159

  15. On the machine learning-assisted identification of the fundamental parameters of nonstandard microfin arrays to assess their heat transfer performance

    Engineering Applications of Artificial Intelligence, Vol. 136

  16. Robust optimization of heat-transfer-enhancing microtextured surfaces based on machine learning surrogate models

    International Communications in Heat and Mass Transfer, Vol. 151

  17. Role of Air Staging in a Batch-Type Fixed Bed Biomass Combustor under Constant Primary Air

    Journal of Thermal Science, Vol. 33, Núm. 1, pp. 284-299

  18. Secondary air induced flow structures and their interplay with the temperature field in fixed bed combustors

    Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy

  19. Wear protection assessment of ultralow viscosity lubricants in high-power-density engines: A novel wear prediction algorithm

    Friction, Vol. 12, Núm. 8, pp. 1785-1800

2023

  1. Analysis of the local growth and density evolution of soot deposits generated under hydrocarbon condensation: 3D simulation and detailed experimental validation

    Results in Engineering, Vol. 18