JACOBO PORTEIRO FRESCO-rekin lankidetzan egindako argitalpenak (19)

2024

  1. Wear protection assessment of ultralow viscosity lubricants in high-power-density engines: A novel wear prediction algorithm

    Friction, Vol. 12, Núm. 8, pp. 1785-1800

2023

  1. Friction assessment of ultralow viscosity lubricant formulations based on a validated elastohydrodynamic simulation

    International Journal of Engine Research, Vol. 24, Núm. 8, pp. 3532-3543

2018

  1. CFD steady model applied to a biomass boiler operating in air enrichment conditions

    Energies, Vol. 11, Núm. 10

  2. Numerical study of an external device for the improvement of the thermal stratification in hot water storage tanks

    Applied Thermal Engineering, Vol. 144, pp. 996-1009

  3. Numerical study of the thermal behaviour of a water heater tank with a corrugated coil

    International Journal of Heat and Mass Transfer, Vol. 122, pp. 574-586

2012

  1. Numerical modeling of the combustion of densified wood under fixed-bed conditions

    Fuel, Vol. 93, pp. 149-159

  2. Numerical simulation of a small-scale biomass boiler

    Energy Conversion and Management

  3. Study of the reaction front thickness in a counter-current fixed-bed combustor of a pelletised biomass

    Combustion and Flame, Vol. 159, Núm. 3, pp. 1296-1302

2011

  1. A refrigerated web camera for photogrammetric video measurement inside biomass boilers and combustion analysis

    Sensors, Vol. 11, Núm. 2, pp. 1246-1260

  2. Diesel engine condition monitoring using a multi-net neural network system with nonintrusive sensors

    Applied Thermal Engineering

2010

  1. Experimental analysis of the ignition front propagation of several biomass fuels in a fixed-bed combustor

    Fuel, Vol. 89, Núm. 1, pp. 26-35

  2. The motion of discs and spherical fuel particles in combustion burners based on Monte Carlo simulation

    Energy Conversion and Management, Vol. 51, Núm. 4, pp. 795-801

2009

  1. Available exhaust gas power in different configurations in a pellet stove plant

    Renewable Energy, Vol. 34, Núm. 12, pp. 2852-2859

  2. Numerical modeling of a biomass pellet domestic boiler

    Energy and Fuels, Vol. 23, Núm. 2, pp. 1067-1075

  3. Simulation and experimental validation of a methanol burner

    Fuel, Vol. 88, Núm. 2, pp. 326-334

  4. Study of the feasibility of mixing Refuse Derived Fuels with wood pellets through the grey and Fuzzy theory

    Renewable Energy, Vol. 34, Núm. 12, pp. 2607-2612

2008

  1. Improving the cofiring process of wood pellet and refuse derived fuel in a small-scale boiler plant

    Energy and Fuels, Vol. 22, Núm. 3, pp. 2121-2128

2007

  1. A model for the combustion of large particles of densified wood

    Energy and Fuels, Vol. 21, Núm. 6, pp. 3151-3159

  2. Study of the combustion of pellets and RDF in a small boiler-stove plant

    Clean Air, Vol. 8, Núm. 3, pp. 183-197