Publikationen in Zusammenarbeit mit Forschern von Universitat d'Alacant (12)

2024

  1. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

2023

  1. A brief review of the effect of wildfires on rockfall occurrence

    IOP Conference Series: Earth and Environmental Science

2022

  1. Considerations Relevant to the Stability of Granite Boulders

    Rock Mechanics and Rock Engineering, Vol. 55, Núm. 5, pp. 2729-2745

  2. Influence of water content on the basic friction angle of porous limestones—experimental study using an automated tilting table

    Bulletin of Engineering Geology and the Environment, Vol. 81, Núm. 6

2021

  1. Determination of the basic friction angle fb of joints using the field tilt test: Results of various "fast" tests on outcrops

    IOP Conference Series: Earth and Environmental Science

  2. Effects of wildfire on rockfall occurrence: a review through actual cases in spain

    Applied Sciences (Switzerland), Vol. 11, Núm. 6, pp. 1-26

2020

  1. Evaluation of Strength and Deformability of Soft Sedimentary Rocks in Dry and Saturated Conditions Through Needle Penetration and Point Load Tests: A Comparative Study

    Rock Mechanics and Rock Engineering, Vol. 53, Núm. 6, pp. 2707-2726

  2. Relevant considerations on the stability of granite boulders

    54th U.S. Rock Mechanics/Geomechanics Symposium

  3. Stability analysis of balanced boulders: Methodology and case study

    ISRM International Symposium - EUROCK 2020

  4. Using the needle penetration test to determine strength and deformability of dry and saturated siltstones

    ISRM International Symposium - EUROCK 2020

2019

  1. A multi-approach rockfall hazard assessment on a weathered granite natural rock slope

    Landslides, Vol. 16, Núm. 10, pp. 2005-2015

  2. Failure mechanisms and stability analyses of granitic boulders focusing a case study in Galicia (Spain)

    International Journal of Rock Mechanics and Mining Sciences, Vol. 119, pp. 58-71