Publicacións en colaboración con investigadores/as de Centro de Estudios y Experimentación de Obras Publicas (18)

2024

  1. Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment

    Rock Mechanics and Rock Engineering, Vol. 57, Núm. 5, pp. 3617-3634

2023

  1. A New Insight into the Stability of Precariously Balanced Rocks

    Rock Mechanics and Rock Engineering, Vol. 56, Núm. 5, pp. 3539-3550

  2. A brief review of the effect of wildfires on rockfall occurrence

    IOP Conference Series: Earth and Environmental Science

  3. Size effects on the tensile strength and fracture toughness of granitic rock in different tests

    Journal of Rock Mechanics and Geotechnical Engineering, Vol. 15, Núm. 9, pp. 2179-2192

  4. Toppling of a rock block resting on a rough surface

    IOP Conference Series: Earth and Environmental Science

2022

  1. Considerations Relevant to the Stability of Granite Boulders

    Rock Mechanics and Rock Engineering, Vol. 55, Núm. 5, pp. 2729-2745

  2. Influence of water content on the basic friction angle of porous limestones—experimental study using an automated tilting table

    Bulletin of Engineering Geology and the Environment, Vol. 81, Núm. 6

2021

  1. Effects of wildfire on rockfall occurrence: a review through actual cases in spain

    Applied Sciences (Switzerland), Vol. 11, Núm. 6, pp. 1-26

  2. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

2020

  1. Relevant considerations on the stability of granite boulders

    54th U.S. Rock Mechanics/Geomechanics Symposium

  2. Stability analysis of balanced boulders: Methodology and case study

    ISRM International Symposium - EUROCK 2020

  3. The use of open-source hardware and software in low-cost geotechnical sensors: A strain-gauge logger and a tilt-test machine

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

2018

  1. Understanding tilt-test results on saw-cut planar rock surfaces from a statistical perspective

    Geomechanics and Geodynamics of Rock Masses

2015

  1. Rock engineering design and the evolution of Eurocode 7: The critical six years to 2020

    13th ISRM International Congress of Rock Mechanics

2014

  1. Preface

    Rock Engineering and Rock Mechanics: Structures in and on Rock Masses

  2. Rock Engineering and Rock Mechanics: Structures in and on Rock Masses

    CRC Press, pp. 1-1600

  3. Some key issues regarding application of Eurocode 7 to rock engineering design

    Rock Engineering and Rock Mechanics: Structures in and on Rock Masses - Proceedings of EUROCK 2014, ISRM European Regional Symposium

2013

  1. Rock engineering design and the evolution of Eurocode 7

    ROCK MECHANICS FOR RESOURCES, ENERGY AND ENVIRONMENT