Publicacións nas que colabora con Susana Lagüela López (18)

2015

  1. Inspection of radiant heating floor applying non-destructive testing techniques: GPR and IRT

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 82, Núm. 190, pp. 221-226

2014

  1. Door recognition in cluttered building interiors using imagery and LiDAR data

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  2. Indoor daylight simulation performed on automatically generated as-built 3D models

    Energy and Buildings, Vol. 68, Núm. PARTA, pp. 54-62

  3. LIDAR-equipped UAV for building information modelling

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  4. Non-destructive approach for the generation and thermal characterization of an as-built BIM

    Construction and Building Materials, Vol. 51, pp. 55-61

2013

  1. Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes

    Automation in Construction, Vol. 31, pp. 230-240

  2. Low-cost aerial unit for outdoor inspection of building façades

    Automation in Construction, Vol. 36, pp. 128-135

  3. Semantic as-built 3d models including shades for the evaluation of solar influence on buildings

    Solar Energy, Vol. 92, pp. 269-279

2012

  1. AUTOMATIC PROCEDURE FOR THE REGISTRATION OF THERMOGRAPHIC IMAGES WITH POINT CLOUDS

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  2. As-built BIM with shades modeling for energy analysis

    Proceedings of the 2012 18th International Conference on Virtual Systems and Multimedia, VSMM 2012: Virtual Systems in the Information Society

  3. Automation of thermographic 3D modelling through image fusion and image matching techniques

    Automation in Construction, Vol. 27, pp. 24-31

  4. E-actividades de aprendizaje en la documentación e inventario de estructuras históricas

    Investigaciones sobre docencia universitaria y nuevas metodologías (Educación Editora), pp. 183-188

  5. High performance grid for the metric calibration of thermographic cameras

    Measurement Science and Technology, Vol. 23, Núm. 1

  6. Novel approach to 3D thermography and energy efficiency evaluation

    Energy and Buildings, Vol. 54, pp. 436-443

  7. Single image rectification of thermal images for geometric studies in façade inspections

    Infrared Physics and Technology, Vol. 55, Núm. 5, pp. 421-426

2011

  1. Automation of thermographic 3D modelling through image fusion and image matching techniques

    Proceedings of the 28th International Symposium on Automation and Robotics in Construction, ISARC 2011

  2. Calibration and verification of thermographic cameras for geometric measurements

    Infrared Physics and Technology, Vol. 54, Núm. 2, pp. 92-99

  3. Energy efficiency studies through 3D laser scanning and thermographic technologies

    Energy and Buildings, Vol. 43, Núm. 6, pp. 1216-1221