Publicacións nas que colabora con JOSE CARLOS CAAMAÑO MARTINEZ (21)

2024

  1. Problemas de estruturas de barras, 50 Exercicios resoltos paso a paso

    Servizo de Publicacións

2020

  1. Analysis of steel connections with girder clamps according to the bolts preload

    Journal of Constructional Steel Research, Vol. 168

  2. Hbim application to historical steel structures: The case study of lapela bridge

    World Congress on Civil, Structural, and Environmental Engineering

  3. Two-dimensional models of variable inertia from LiDAR data for structural analysis of timber trusses

    Construction and Building Materials, Vol. 231

2019

  1. Uncertainty sources in the structural assessment of masonry arch bridges: A case study of a single-span stone arch bridge

    IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management - Report

2018

  1. Analysis of the shear behavior of structural metal joints based on the use of girder clamps

    Proceedings of the 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials 11th National Congress on Experimental Mechanics (Porto/Portugal, 4-7 November 2018): TEMM2018 CNME2018 (INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial), pp. 705-710

  2. Automated calibration of fem models using LiDAR point clouds

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

2017

  1. Analytical T-stub model for the analysis of clamps in structural metal joints

    Journal of Constructional Steel Research, Vol. 130, pp. 138-147

  2. Automated processing of dense points clouds to automatically determine deformations in highly irregular timber structures

    Construction and Building Materials, Vol. 146, pp. 393-402

2016

  1. Algorithm for the analysis of deformations and stresses due to torsion in a metal beam from LIDAR data

    Structural Control and Health Monitoring, Vol. 23, Núm. 7, pp. 1032-1046

  2. Algorithm for the analysis of the geometric properties of cross-sections of timber beams with lack of material from LIDAR data

    Materials and Structures/Materiaux et Constructions, Vol. 49, Núm. 10, pp. 4265-4278

  3. Exploitation of geometric data provided by laser scanning to create FEM structural models of bridges

    Journal of Performance of Constructed Facilities, Vol. 30, Núm. 3

  4. Metallic industrial structures. As-built and structural calculation

    Non-Destructive Techniques for the Evaluation of Structures and Infrastructure (CRC Press), pp. 303-316

2015

  1. Algorithm for beam deformation modeling from LiDAR data

    Measurement: Journal of the International Measurement Confederation, Vol. 76, pp. 20-31

  2. Automatic creation of structural models from point cloud data: The case of masonry structures

    ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences

2014

  1. Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes

    ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 96, pp. 47-56

2012

  1. A novel methodology for the structural assessment of stone arches based on geometric data by integration of photogrammetry and ground-penetrating radar

    Engineering Structures, Vol. 35, pp. 296-306

  2. FROM GEOMETRY TO DIAGNOSIS: EXPERIENCES OF GEOMATICS IN STRUCTURAL ENGINEERING

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

2011

  1. GPR analysis of a masonry arch for structural assessment: Evaluation of historical bridges

    2011 6th International Workshop on Advanced Ground Penetrating Radar, IWAGPR 2011

  2. Photogrammetric 3D modelling and mechanical analysis of masonry arches: An approach based on a discontinuous model of voussoirs

    Automation in Construction, Vol. 20, Núm. 4, pp. 380-388