Publications (36) JOAQUIN BALTASAR COLLAZO RODRIGUEZ publications

2024

  1. Improving the surface durability of wind gears via shot peening and superfinishing

    Journal of Engineering Research (Kuwait)

  2. Performance of a Modular Ton-Scale Pixel-Readout Liquid Argon Time Projection Chamber

    Instruments, Vol. 8, Núm. 3

2023

  1. Improve wind gears bending performance by means of IGS (Improved gear surface)

    International Journal of Fatigue, Vol. 172

2022

  1. Increase wind gearbox power density by means of IGS (Improved Gear Surface)

    International Journal of Fatigue, Vol. 159

2019

  1. Assessment of micro-cogeneration network in European mining areas: A prototype system

    Energy, Vol. 174, pp. 350-358

  2. CFD analysis of a buffer tank redesigned with a thermosyphon concentrator tube

    Energies, Vol. 12, Núm. 11

2018

  1. CFD steady model applied to a biomass boiler operating in air enrichment conditions

    Energies, Vol. 11, Núm. 10

  2. Numerical study of an external device for the improvement of the thermal stratification in hot water storage tanks

    Applied Thermal Engineering, Vol. 144, pp. 996-1009

  3. Numerical study of the thermal behaviour of a water heater tank with a corrugated coil

    International Journal of Heat and Mass Transfer, Vol. 122, pp. 574-586

2017

  1. OPTIMIZATION OF THE AUXILIARY-BEAM SYSTEM IN RAILWAY BRIDGE VIBRATION MITIGATION USING FEM SIMULATION AND GENETIC ALGORITHMS

    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017)

2013

  1. Development of an experimental technique for oil recovery during biomass pyrolysis

    Renewable Energy, Vol. 60, pp. 179-184

2012

  1. A numerical study of unsteady gas-solid flow between parallel porous plates submitted to a magnetic field

    Meccanica, Vol. 47, Núm. 2, pp. 501-514

  2. Determination of the specific heat of biomass materials and the combustion energy of coke by DSC analysis

    Energy, Vol. 45, Núm. 1, pp. 746-752

  3. Estudio preliminar sobre la carga de trabajo en la titulación de Ingeniería Industrial

    Tecnologías Aplicadas en la Enseñanza de la Electrónica: TAEE 2012 : Actas del X Congreso de Tecnologías Aplicadas en la Enseñanza de la Electrónica, Escuela de Ingeniería Industrial Universidad de Vigo Vigo, España 13 al 15 Junio de 2012

  4. Numerical modeling of the combustion of densified wood under fixed-bed conditions

    Fuel, Vol. 93, pp. 149-159

  5. Numerical simulation of a small-scale biomass boiler

    Energy Conversion and Management

  6. Study of the reaction front thickness in a counter-current fixed-bed combustor of a pelletised biomass

    Combustion and Flame, Vol. 159, Núm. 3, pp. 1296-1302

2011

  1. A refrigerated web camera for photogrammetric video measurement inside biomass boilers and combustion analysis

    Sensors, Vol. 11, Núm. 2, pp. 1246-1260

  2. Applicability of infrared thermography to the study of the behaviour of stone panels as building envelopes

    Energy and Buildings, Vol. 43, Núm. 8, pp. 1845-1851

  3. Combined heat and mass transfer by natural convection from a semi-infinite plate submitted to a magnetic field with Hall currents

    Engineering Applications of Computational Fluid Mechanics, Vol. 5, Núm. 2, pp. 188-200