Publicaciones en colaboración con investigadores/as de Universidad Católica del Norte (12)

2024

  1. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

2021

  1. Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito

    Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398

  2. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

  3. Scale effect and correlation between uniaxial compressive strength and point load index for limestone and travertine

    Applied Sciences (Switzerland), Vol. 11, Núm. 8

2020

  1. Applying statistical analysis and machine learning for modeling the UCS from P-wave velocity, density and porosity on dry travertine

    Applied Sciences (Switzerland), Vol. 10, Núm. 13

  2. Motorized tilt table based on arduino-controlled stepper motor

    54th U.S. Rock Mechanics/Geomechanics Symposium

  3. Stability analysis of over-tilted benches in an ornamental granite quarry

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

2019

  1. Analysis of a complex slope failure in a granodiorite quarry bench

    Bulletin of Engineering Geology and the Environment, Vol. 78, Núm. 2, pp. 1209-1224

2018

  1. Block toppling stability in the case of rock blocks with rounded edges

    Engineering Geology, Vol. 234, pp. 192-203

2017

  1. An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models

    Procedia Engineering

  2. Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine

    ISRM AfriRock - Rock Mechanics for Africa

  3. Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing

    Procedia Engineering