Escuela Naval Militar-ko ikertzaileekin lankidetzan egindako argitalpenak (25)

2024

  1. Heat transfer and hydrodynamic performance of ZrO2 geothermal nanofluids through tubular and plate heat exchangers

    Applied Thermal Engineering, Vol. 253

2022

  1. Feasibility study of a collision avoidance methodology for CubeSats based on its active ADCS system

    Proceedings of the International Astronautical Congress, IAC

  2. Optimisation of thermal comfort and indoor air quality estimations applied to in-use buildings combining NSGA-III and XGBoost

    Sustainable Cities and Society, Vol. 80

2021

  1. Analysis of heat transfer characteristics of a GnP aqueous nanofluid through a double-tube heat exchanger

    Nanomaterials, Vol. 11, Núm. 4

  2. Empirical validation of a multizone building model coupled with an air flow network under complex realistic situations

    Energy and Buildings, Vol. 249

  3. Estimation of heat loss coefficient and thermal demands of in-use building by capturing thermal inertia using lstm neural networks

    Energies, Vol. 14, Núm. 16

  4. Feasibility of different weather data sources applied to building indoor temperature estimation using LSTM neural networks

    Sustainability (Switzerland), Vol. 13, Núm. 24

  5. Thermal study of a passive cooling device operating through a bubble lifting CLTPT of NOVEC 7000 with a two-fluid condenser

    International Journal of Heat and Mass Transfer, Vol. 177

2020

  1. A framework for integrating human factors in the early stages of ship design: Application to the mess halls of a surface combatant

    Journal of Ship Production and Design, Vol. 36, Núm. 1

  2. Biological systems for CCS: Patent review as a criterion for technological development

    Applied Energy, Vol. 257

  3. Development of a transient model of a lightweight, portable and flexible air-based PV-T module for UAV shelter hangars

    Energies, Vol. 13, Núm. 11

2019

  1. Assessment of micro-cogeneration network in European mining areas: A prototype system

    Energy, Vol. 174, pp. 350-358

  2. CFD analysis of a buffer tank redesigned with a thermosyphon concentrator tube

    Energies, Vol. 12, Núm. 11

  3. Steady CFD combustion modeling for biomass boilers: An application to the study of the exhaust gas recirculation performance

    Energy Conversion and Management, Vol. 179, pp. 91-103

2018

  1. An Eulerian model for the simulation of the thermal conversion of a single large biomass particle

    Fuel, Vol. 220, pp. 671-681

  2. CFD steady model applied to a biomass boiler operating in air enrichment conditions

    Energies, Vol. 11, Núm. 10

  3. Modelling hybrid thermal systems for district heating: A pilot project in wood transformation industry

    Journal of Cleaner Production, Vol. 194, pp. 726-734

  4. Numerical study of an external device for the improvement of the thermal stratification in hot water storage tanks

    Applied Thermal Engineering, Vol. 144, pp. 996-1009

  5. Numerical study of the thermal behaviour of a water heater tank with a corrugated coil

    International Journal of Heat and Mass Transfer, Vol. 122, pp. 574-586

  6. Technology evolution in membrane-based CCS

    Energies, Vol. 11, Núm. 11