Enxeñaría mecánica, máquinas e motores térmicos e fluídos
Departamento
![Foto de Enxeñaría mecánica, máquinas e motores térmicos e fluídos](/img/noimage.png)
![Foto de Universidad del País Vasco/Euskal Herriko Unibertsitatea](/img/noimage_org.png)
Universidad del País Vasco/Euskal Herriko Unibertsitatea
Lejona, EspañaPublicacións en colaboración con investigadores/as de Universidad del País Vasco/Euskal Herriko Unibertsitatea (23)
2024
2023
-
Experimental study on the influence of a conical cavity’s inclination angle and aspect ratio on thermal behavior of a cone cooled with nanofluid saturated porous media
Experimental Heat Transfer, Vol. 36, Núm. 7, pp. 970-983
2022
-
Experimental study on the thermal control of a roof-top collective building antenna using a porous matrix filled with Water-Copper nanofluid
Case Studies in Thermal Engineering, Vol. 32
-
Overall uncertainty analysis of zonal indoor air temperature measurement in an in-use office building
Building and Environment, Vol. 219
-
Thermal behavior of a conical antenna cooled with nanofluid saturated porous media: effects of the cavity’s inclination and aspect ratio
International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 32, Núm. 12, pp. 3935-3947
2021
2020
-
A functional data analysis for assessing the impact of a retrofitting in the energy performance of a building
Mathematics, Vol. 8, Núm. 4
-
Estimation of the heat loss coefficient of two occupied residential buildings through an average method
Energies, Vol. 13, Núm. 21
-
Model calibration and exergoeconomic optimization with NSGA-II applied to a residential cogeneration
Applied Thermal Engineering, Vol. 169
-
Model calibration methodology to assess the actual lighting conditions of a road infrastructure
Infrastructures, Vol. 5, Núm. 1
2019
-
Energy characterization of a PASLINK test cell with a gravel covered roof using a novel methodology: Sensitivity analysis and Bayesian calibration
Journal of Building Engineering, Vol. 22, pp. 1-11
-
Mathematical development of an average method for estimating the reduction of the Heat Loss Coefficient of an energetically retrofitted occupied office building
Energy and Buildings, Vol. 192, pp. 101-122
-
Orientation-constrained system for lamp detection in buildings based on computer vision
Sensors (Switzerland), Vol. 19, Núm. 7
2018
-
Thermal energy demand and potential energy savings in a Spanish surgical suite through calibrated simulations
Energy and Buildings, Vol. 174, pp. 513-526
2007
-
Contribution of renewable energy sources to electricity production in the La Rioja Autonomous Community, Spain. A review
Renewable and Sustainable Energy Reviews, Vol. 11, Núm. 6, pp. 1244-1259
-
Contribution of renewable energy sources to electricity production in the autonomous community of Navarre (Spain): A review
Renewable and Sustainable Energy Reviews, Vol. 11, Núm. 8, pp. 1776-1793
-
Modellig and dynamic simulation of processes with 'MATLAB'. An application of a natural gas installation in a power plant
Energy, Vol. 32, Núm. 7, pp. 1271-1282
2006
-
Exergetic analysis and thermoeconomic study for a container-housed engine
Applied Thermal Engineering, Vol. 26, Núm. 16, pp. 1840-1850
-
Modelling and simulation of the dynamic performance of a natural-gas turbine flowmeter
Applied Energy, Vol. 83, Núm. 11, pp. 1222-1234
-
Optimising ventilation-system design for a container-housed engine
Applied Energy, Vol. 83, Núm. 10, pp. 1125-1138