Enxeñaría dos materiais, mecánica aplicada e construción

2013

1. A novel approach to evaluate masonry arch stability on the basis of limit analysis theory and non-destructive geometric characterization

   Automation in Construction, Vol. 31, pp. 140-148

2. Accuracy verification of the Lynx Mobile Mapper system

   Optics and Laser Technology, Vol. 45, Núm. 1, pp. 578-586

3. AlxTayOz mixture coatings prepared using atomic layer deposition for corrosion protection of steel

   Chemical Vapor Deposition, Vol. 19, Núm. 4-6, pp. 194-203

4. Automatic segmentation of road overpasses and detection of mortar efflorescence using mobile LiDAR data

   Optics and Laser Technology, Vol. 54, pp. 353-361

5. Characterization of hybrid sol-gel coatings applied over tinplate

   Portugaliae Electrochimica Acta, Vol. 31, Núm. 5, pp. 265-276

6. Characterization of the response of quasi-periodic masonry: Geometrical investigation, homogenization and application to the Guimarães castle, Portugal

   Engineering Structures, Vol. 56, pp. 621-641

7. Chloride transport through cementitious membranes using pulsed current

   Cement and Concrete Composites, Vol. 39, pp. 18-22

8. Evaluation of road signs using radiometric and geometric data from terrestrial LiDAR

   Optica Applicata, Vol. 43, Núm. 3, pp. 421-433

9. Hydrogen-argon plasma pre-treatment for improving the anti-corrosion properties of thin Al2O3 films deposited using atomic layer deposition on steel

   Thin Solid Films, Vol. 534, pp. 384-393

10. Metrological evaluation of Microsoft Kinect and Asus Xtion sensors

    Measurement: Journal of the International Measurement Confederation, Vol. 46, Núm. 6, pp. 1800-1806

11. Modification of AISI M2 high-speed tool steels after laser-surface melting under different operating conditions

    Welding International, Vol. 27, Núm. 1, pp. 1-9

12. Non-destructive testing for the analysis of moisture in the masonry arch bridge of Lubians (Spain)

    Structural Control and Health Monitoring, Vol. 20, Núm. 11, pp. 1366-1376

13. On the growth of nanostructured iron hydroxy-fluorides for Li-ion batteries

    Journal of Power Sources, Vol. 241, pp. 567-571

14. Oxide film growth by CSV on AISI 316L: A combined electrochemical and analytical characterization

    Journal of the Brazilian Chemical Society, Vol. 24, Núm. 8, pp. 1246-1258

15. Performance testing of LiDAR exploitation software

    Computers and Geosciences, Vol. 54, pp. 122-129

16. Removal of graffiti from quarry stone by high power diode laser

    Optics and Lasers in Engineering, Vol. 51, Núm. 4, pp. 364-370

17. Structural evaluation of historic masonry arch bridges based on first hinge formation

    Construction and Building Materials, Vol. 47, pp. 569-578

18. Tantalum oxide nanocoatings prepared by atomic layer and filtered cathodic arc deposition for corrosion protection of steel: Comparative surface and electrochemical analysis

    Electrochimica Acta, Vol. 90, pp. 232-245

19. The influence of phase change materials on the properties of self-compacting concrete

    Materials, Vol. 6, Núm. 8, pp. 3530-3546

20. The use of sol-gel film as pre-treatment for tinplate used in the canning industry

    Progress in Organic Coatings, Vol. 76, Núm. 12, pp. 1819-1826