Departamento
Enxeñaría dos materiais, mecánica aplicada e construción
Artigos (22) Publicacións nas que participase algún/ha investigador/a
2013
-
A novel approach to evaluate masonry arch stability on the basis of limit analysis theory and non-destructive geometric characterization
Automation in Construction, Vol. 31, pp. 140-148
-
Accuracy verification of the Lynx Mobile Mapper system
Optics and Laser Technology, Vol. 45, Núm. 1, pp. 578-586
-
AlxTayOz mixture coatings prepared using atomic layer deposition for corrosion protection of steel
Chemical Vapor Deposition, Vol. 19, Núm. 4-6, pp. 194-203
-
Automatic segmentation of road overpasses and detection of mortar efflorescence using mobile LiDAR data
Optics and Laser Technology, Vol. 54, pp. 353-361
-
Characterization of hybrid sol-gel coatings applied over tinplate
Portugaliae Electrochimica Acta, Vol. 31, Núm. 5, pp. 265-276
-
Characterization of the response of quasi-periodic masonry: Geometrical investigation, homogenization and application to the Guimarães castle, Portugal
Engineering Structures, Vol. 56, pp. 621-641
-
Chloride transport through cementitious membranes using pulsed current
Cement and Concrete Composites, Vol. 39, pp. 18-22
-
Evaluation of road signs using radiometric and geometric data from terrestrial LiDAR
Optica Applicata, Vol. 43, Núm. 3, pp. 421-433
-
Hydrogen-argon plasma pre-treatment for improving the anti-corrosion properties of thin Al2O3 films deposited using atomic layer deposition on steel
Thin Solid Films, Vol. 534, pp. 384-393
-
Metrological evaluation of Microsoft Kinect and Asus Xtion sensors
Measurement: Journal of the International Measurement Confederation, Vol. 46, Núm. 6, pp. 1800-1806
-
Modification of AISI M2 high-speed tool steels after laser-surface melting under different operating conditions
Welding International, Vol. 27, Núm. 1, pp. 1-9
-
Non-destructive testing for the analysis of moisture in the masonry arch bridge of Lubians (Spain)
Structural Control and Health Monitoring, Vol. 20, Núm. 11, pp. 1366-1376
-
On the growth of nanostructured iron hydroxy-fluorides for Li-ion batteries
Journal of Power Sources, Vol. 241, pp. 567-571
-
Oxide film growth by CSV on AISI 316L: A combined electrochemical and analytical characterization
Journal of the Brazilian Chemical Society, Vol. 24, Núm. 8, pp. 1246-1258
-
Performance testing of LiDAR exploitation software
Computers and Geosciences, Vol. 54, pp. 122-129
-
Removal of graffiti from quarry stone by high power diode laser
Optics and Lasers in Engineering, Vol. 51, Núm. 4, pp. 364-370
-
Structural evaluation of historic masonry arch bridges based on first hinge formation
Construction and Building Materials, Vol. 47, pp. 569-578
-
Tantalum oxide nanocoatings prepared by atomic layer and filtered cathodic arc deposition for corrosion protection of steel: Comparative surface and electrochemical analysis
Electrochimica Acta, Vol. 90, pp. 232-245
-
The influence of phase change materials on the properties of self-compacting concrete
Materials, Vol. 6, Núm. 8, pp. 3530-3546
-
The use of sol-gel film as pre-treatment for tinplate used in the canning industry
Progress in Organic Coatings, Vol. 76, Núm. 12, pp. 1819-1826