Publicacións (41) Publicacións nas que participase algún/ha investigador/a

2021

  1. 3D point cloud data processing and infrastructure information models: Methods and findings from safeway project

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  2. 3D printing non-cylindrical strands: Morphological and structural implications

    Additive Manufacturing, Vol. 46

  3. A Method to Correct Indirect Strain Measurements in Laboratory Uniaxial and Triaxial Compressive Strength Tests

    Rock Mechanics and Rock Engineering, Vol. 54, Núm. 6, pp. 2643-2670

  4. A methodology to estimate permeability in porous and fissured rock specimens at laboratory scale

    Archives of Mining Sciences, Vol. 65, Núm. 4, pp. 821-833

  5. Additive Manufacturing

    Elsevier

  6. Additive Manufacturing: A volume in Handbooks in Advanced Manufacturing

    Elsevier, pp. 1-743

  7. Advanced characterization of intermetallic compounds in dissimilar aluminum-steel joints obtained by laser welding-brazing with Al[sbnd]Si filler metals

    Materials Characterization, Vol. 179

  8. Analysis of size effects on the Hoek-Brown failure criterion of intact granite samples

    IOP Conference Series: Earth and Environmental Science

  9. Analysis of stiffness of clamped joints versus bolted joints in steel structures by means of accelerometers and shaking table tests

    Sensors, Vol. 21, Núm. 14

  10. Analytical model for the fatigue analysis of steel joints by clamps according to the lever length

    Materials, Vol. 14, Núm. 24

  11. Anisotropic deformability and strength of slate from NW-Spain

    International Journal of Rock Mechanics and Mining Sciences, Vol. 148

  12. Automatic generation of IFC models from point cloud data of transport infrastructure environments

    EG-ICE 2021 Workshop on Intelligent Computing in Engineering, Proceedings

  13. Automatic identification and geometrical modeling of steel rivets of historical structures from lidar data

    Remote Sensing, Vol. 13, Núm. 11

  14. Automatic point cloud semantic segmentation of complex railway environments

    Remote Sensing, Vol. 13, Núm. 12

  15. Average force obtained from the impulse or from the mechanical work?

    Physics Education, Vol. 56, Núm. 5

  16. Biogenic calcium phosphate from fish discards and by‐products

    Applied Sciences (Switzerland), Vol. 11, Núm. 8

  17. Characterization of phosphate coatings: Influence of the acid pickling conditions

    Materials, Vol. 14, Núm. 4, pp. 1-15

  18. Combination of laser scanner and drilling resistance tests to measure geometry change for structural assessment of timber beams exposed to fire

    Journal of Building Engineering, Vol. 40

  19. Conductivity assessment of multifunctional cement pastes by impedance spectroscopy

    Corrosion Science, Vol. 185

  20. Developments in laser welding of aluminum alloys

    Advanced Welding and Deforming (Elsevier), pp. 127-150