JULIA ARMESTO GONZALEZ-rekin lankidetzan egindako argitalpenak (67)

2014

  1. Door recognition in cluttered building interiors using imagery and LiDAR data

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  2. Indoor daylight simulation performed on automatically generated as-built 3D models

    Energy and Buildings, Vol. 68, Núm. PARTA, pp. 54-62

  3. Non-destructive approach for the generation and thermal characterization of an as-built BIM

    Construction and Building Materials, Vol. 51, pp. 55-61

2013

  1. Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes

    Automation in Construction, Vol. 31, pp. 230-240

  2. Evaluation of road signs using radiometric and geometric data from terrestrial LiDAR

    Optica Applicata, Vol. 43, Núm. 3, pp. 421-433

  3. Long range measurements using a contactless low cost optical sensor

    Optica Applicata, Vol. 43, Núm. 3, pp. 435-440

  4. Low-cost aerial unit for outdoor inspection of building façades

    Automation in Construction, Vol. 36, pp. 128-135

  5. Semantic as-built 3d models including shades for the evaluation of solar influence on buildings

    Solar Energy, Vol. 92, pp. 269-279

  6. Semi-automatic land consolidation software based on geographic information systems

    Computers and Electronics in Agriculture, Vol. 97, pp. 1-5

  7. Structural evaluation of historic masonry arch bridges based on first hinge formation

    Construction and Building Materials, Vol. 47, pp. 569-578

  8. Three-dimensional modeling of the romanesque church of santa maria de castrelos (Vigo - Spain) using terrestrial laser scanner

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

2012

  1. AUTOMATIC PROCEDURE FOR THE REGISTRATION OF THERMOGRAPHIC IMAGES WITH POINT CLOUDS

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  2. An innovative method for remote measurement of minimum vertical underclearance in routine bridge inspection

    Automation in Construction, Vol. 25, pp. 34-40

  3. As-built BIM with shades modeling for energy analysis

    Proceedings of the 2012 18th International Conference on Virtual Systems and Multimedia, VSMM 2012: Virtual Systems in the Information Society

  4. Automation of thermographic 3D modelling through image fusion and image matching techniques

    Automation in Construction, Vol. 27, pp. 24-31

  5. FROM GEOMETRY TO DIAGNOSIS: EXPERIENCES OF GEOMATICS IN STRUCTURAL ENGINEERING

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  6. Novel method to determine laser scanner accuracy for applications in civil engineering

    Optica Applicata, Vol. 42, Núm. 1, pp. 43-53

  7. Photogrammetry and laser scanner technology applied to length measurements in car testing laboratories

    Measurement: Journal of the International Measurement Confederation, Vol. 45, Núm. 3, pp. 354-363

  8. Procedure to evaluate the accuracy of laser-scanning systems using a linear precision electro-mechanical actuator

    IET Science, Measurement and Technology, Vol. 6, Núm. 1, pp. 6-12

  9. Single image rectification of thermal images for geometric studies in façade inspections

    Infrared Physics and Technology, Vol. 55, Núm. 5, pp. 421-426