E.T.S. De Enxeñería De Minas
Centro
![Foto de E.T.S. De Enxeñería De Minas](/img/noimage.png)
![Foto de Universidad Católica del Norte](/img/noimage_org.png)
Universidad Católica del Norte
Antofagasta, ChilePublicacións en colaboración con investigadores/as de Universidad Católica del Norte (18)
2024
-
Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face
Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4
2021
-
Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito
Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398
-
Laboratory physical modelling of block toppling instability by means of tilt tests
Engineering Geology, Vol. 282
-
Scale effect and correlation between uniaxial compressive strength and point load index for limestone and travertine
Applied Sciences (Switzerland), Vol. 11, Núm. 8
2020
-
Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales
Bulletin of Engineering Geology and the Environment, Vol. 79, Núm. 9, pp. 4975-4997
-
Grinding or not grinding, that is the question
Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019
-
Numerical and experimental characterization of mechanical behaviour of an artificially jointed rock
ISRM International Symposium - EUROCK 2020
-
Stability analysis of over-tilted benches in an ornamental granite quarry
Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019
2019
-
Analysis of a complex slope failure in a granodiorite quarry bench
Bulletin of Engineering Geology and the Environment, Vol. 78, Núm. 2, pp. 1209-1224
2018
-
Block toppling stability in the case of rock blocks with rounded edges
Engineering Geology, Vol. 234, pp. 192-203
-
Study of the mechanical behavior of intact and jointed rocks in laboratory with particular emphasis on dilatancy
ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018
2017
-
An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models
Procedia Engineering
-
Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions
Acta Geotechnica, Vol. 12, Núm. 6, pp. 1229-1242
-
Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine
ISRM AfriRock - Rock Mechanics for Africa
-
Sensitivity Analysis of the Micro-Parameters Used in a PFC Analysis Towards the Mechanical Properties of Rocks
Procedia Engineering
-
Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing
Procedia Engineering
-
Strapping of pillars with cables to enhance pillar stability
Journal of the Southern African Institute of Mining and Metallurgy, Vol. 117, Núm. 6, pp. 527-540
-
Triaxial strength and deformability of intact and increasingly jointed granite samples
International Journal of Rock Mechanics and Mining Sciences, Vol. 95, pp. 87-103