CINTECX
Centre de recherche
Javier
Arzúa Touriño
Publications dans lesquelles il/elle collabore avec Javier Arzúa Touriño (42)
2024
-
An improvement in the method of correcting indirect radial strain measurements during triaxial strength tests in rocks
MethodsX, Vol. 13
-
Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face
Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4
2021
-
Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito
Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398
2020
-
Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales
Bulletin of Engineering Geology and the Environment, Vol. 79, Núm. 9, pp. 4975-4997
-
Grinding or not grinding, that is the question
Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019
-
Numerical and experimental characterization of mechanical behaviour of an artificially jointed rock
ISRM International Symposium - EUROCK 2020
2019
-
Analysis of a complex slope failure in a granodiorite quarry bench
Bulletin of Engineering Geology and the Environment, Vol. 78, Núm. 2, pp. 1209-1224
2018
-
Block toppling stability in the case of rock blocks with rounded edges
Engineering Geology, Vol. 234, pp. 192-203
-
Crack Damage Parameters and Dilatancy of Artificially Jointed Granite Samples Under Triaxial Compression
Rock Mechanics and Rock Engineering, Vol. 51, Núm. 6, pp. 1637-1656
-
Study of the mechanical behavior of intact and jointed rocks in laboratory with particular emphasis on dilatancy
ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018
2017
-
An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models
Procedia Engineering
-
Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions
Acta Geotechnica, Vol. 12, Núm. 6, pp. 1229-1242
-
Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine
ISRM AfriRock - Rock Mechanics for Africa
-
Corrigendum to “Verification of a laboratory-based dilation model for in situ conditions using continuum models” [J Rock Mech Geotech Eng 6 (2014) 522–534] (S1674775514000869) (10.1016/j.jrmge.2014.09.004)
Journal of Rock Mechanics and Geotechnical Engineering
-
Diseño geotécnico de minas subterráneas de pizarra
Boletín geológico y minero, Vol. 128, Núm. 2, pp. 405-420
-
Efecto del desgaste de la roca y de la velocidad de ensayo en la determinación mediante tilt test del ángulo de fricción básico de juntas en roca
Ingeniería civil, Núm. 187, pp. 43-52
-
Sensitivity Analysis of the Micro-Parameters Used in a PFC Analysis Towards the Mechanical Properties of Rocks
Procedia Engineering
-
Simulación de ensayos triaxiales de granito mediante el código PFC
Ingeniería civil, Núm. 187, pp. 33-42
-
Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing
Procedia Engineering
-
Strapping of pillars with cables to enhance pillar stability
Journal of the Southern African Institute of Mining and Metallurgy, Vol. 117, Núm. 6, pp. 527-540