Universidad Católica del Norte-ko ikertzaileekin lankidetzan egindako argitalpenak (20)

2024

  1. An improvement in the method of correcting indirect radial strain measurements during triaxial strength tests in rocks

    MethodsX, Vol. 13

  2. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

  3. Performance of a Modular Ton-Scale Pixel-Readout Liquid Argon Time Projection Chamber

    Instruments, Vol. 8, Núm. 3

  4. The DUNE far detector vertical drift technology Technical design report

    Journal of Instrumentation, Vol. 19, Núm. 8

2021

  1. Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito

    Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398

  2. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

2020

  1. Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales

    Bulletin of Engineering Geology and the Environment, Vol. 79, Núm. 9, pp. 4975-4997

  2. Grinding or not grinding, that is the question

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

  3. Numerical and experimental characterization of mechanical behaviour of an artificially jointed rock

    ISRM International Symposium - EUROCK 2020

  4. Stability analysis of over-tilted benches in an ornamental granite quarry

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

2019

  1. Analysis of a complex slope failure in a granodiorite quarry bench

    Bulletin of Engineering Geology and the Environment, Vol. 78, Núm. 2, pp. 1209-1224

2018

  1. Block toppling stability in the case of rock blocks with rounded edges

    Engineering Geology, Vol. 234, pp. 192-203

  2. Study of the mechanical behavior of intact and jointed rocks in laboratory with particular emphasis on dilatancy

    ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

2017

  1. An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models

    Procedia Engineering

  2. Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions

    Acta Geotechnica, Vol. 12, Núm. 6, pp. 1229-1242

  3. Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine

    ISRM AfriRock - Rock Mechanics for Africa

  4. Sensitivity Analysis of the Micro-Parameters Used in a PFC Analysis Towards the Mechanical Properties of Rocks

    Procedia Engineering

  5. Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing

    Procedia Engineering

  6. Strapping of pillars with cables to enhance pillar stability

    Journal of the Southern African Institute of Mining and Metallurgy, Vol. 117, Núm. 6, pp. 527-540

  7. Triaxial strength and deformability of intact and increasingly jointed granite samples

    International Journal of Rock Mechanics and Mining Sciences, Vol. 95, pp. 87-103