CINTECX

2021

1. 3D printing non-cylindrical strands: Morphological and structural implications

   Additive Manufacturing, Vol. 46

2. A Method to Correct Indirect Strain Measurements in Laboratory Uniaxial and Triaxial Compressive Strength Tests

   Rock Mechanics and Rock Engineering, Vol. 54, Núm. 6, pp. 2643-2670

3. A Model Predictive Current Controller with Improved Robustness against Measurement Noise and Plant Model Variations

   IEEE Open Journal of Industry Applications, Vol. 2, pp. 131-142

4. A Novel Modulated Model Predictive Control Applied to Six-Phase Induction Motor Drives

   IEEE Transactions on Industrial Electronics, Vol. 68, Núm. 5, pp. 3672-3682

5. A methodology to estimate permeability in porous and fissured rock specimens at laboratory scale

   Archives of Mining Sciences, Vol. 65, Núm. 4, pp. 821-833

6. Acid recovery from copper metallurgical process streams polluted with arsenic by diffusion dialysis

   Journal of Environmental Chemical Engineering, Vol. 9, Núm. 1

7. Actividad práctica para el diseño industrial de procesos avanzados de separación basados en sistemas de membranas para el alumnado de Máster en Ingeniería Química: Diseño de procesos de ultrafiltración y osmosis inversa mediante el software libre WAVE de Dupont para el tratamiento de aguas

   Revista del CIDUI: Congrés Internacional de Docència Universitària i Innovació, Núm. 5

8. Adding value to secondary streams of corn wet milling industry

   CyTA: Journal of food, Vol. 19, Núm. 1, pp. 675-681

9. Advanced characterization of intermetallic compounds in dissimilar aluminum-steel joints obtained by laser welding-brazing with Al[sbnd]Si filler metals

   Materials Characterization, Vol. 179

10. Ai approaches to environmental impact assessments (Eias) in the mining and metals sector using automl and bayesian modeling

    Applied Sciences (Switzerland), Vol. 11, Núm. 17

11. An a priori error analysis of a strain gradient model using c0 interior penalty methods

    Journal of Applied Analysis and Computation, Vol. 11, Núm. 5, pp. 2303-2312

12. An approach towards Zero-Waste wastewater technology: Fluoxetine adsorption on biochar and removal by the sulfate radical

    Chemosphere, Vol. 268

13. Analysis of district heating and cooling energy systems in Spain: Resources, technology and management

    Sustainability (Switzerland), Vol. 13, Núm. 10

14. Analysis of stiffness of clamped joints versus bolted joints in steel structures by means of accelerometers and shaking table tests

    Sensors, Vol. 21, Núm. 14

15. Analytical model for the fatigue analysis of steel joints by clamps according to the lever length

    Materials, Vol. 14, Núm. 24

16. Anisotropic deformability and strength of slate from NW-Spain

    International Journal of Rock Mechanics and Mining Sciences, Vol. 148

17. Aplicación de un láser Nd:YAG para retirar grafiti de la caliza Lioz: influencia de los parámetros láser (longitud de onda, fluencia y número de pulsos) y la composición del grafiti

    Cadernos do Laboratorio Xeolóxico de Laxe: Revista de xeoloxía galega e do hercínico peninsular, Núm. 43, pp. 17-40

18. Arsenic impact on the valorisation schemes of acidic mine waters of the Iberian Pyrite Belt: Integration of selective precipitation and spiral-wound nanofiltration processes

    Journal of Hazardous Materials, Vol. 403

19. Assessment of the methodology for the CFD simulation of the flight of a quadcopter UAV

    Journal of Wind Engineering and Industrial Aerodynamics, Vol. 218

20. Automatic identification and geometrical modeling of steel rivets of historical structures from lidar data

    Remote Sensing, Vol. 13, Núm. 11