Publicacións nas que colabora con Susana Lagüela López (26)

2018

  1. Behavior analysis of novel wearable indoor mapping system based on 3d-slam

    Sensors (Switzerland), Vol. 18, Núm. 3

2017

  1. Thermographic and mobile indoor mapping for the computation of energy losses in buildings

    Indoor and Built Environment, Vol. 26, Núm. 6, pp. 771-784

2016

  1. BIM as management tool for existing buildings

    Non-Destructive Techniques for the Evaluation of Structures and Infrastructure (CRC Press), pp. 377-388

  2. Máster en Geoinformática como respuesta a las necesidades de la industria geoespacial

    Presente y futuro de la docencia universitaria: presente e futuro da docencia universitaria (Educación Editora), pp. 513-518

2015

  1. Aerial thermography from low-cost UAV for the generation of thermographic digital terrain models

    Opto-electronics Review, Vol. 23, Núm. 1, pp. 76-82

  2. Automatic detection and segmentation of columns in as-built buildings from point clouds

    Remote Sensing, Vol. 7, Núm. 11, pp. 15651-15667

  3. Inspection of radiant heating floor applying non-destructive testing techniques: GPR and IRT

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 82, Núm. 190, pp. 221-226

2014

  1. Door recognition in cluttered building interiors using imagery and LiDAR data

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  2. Indoor daylight simulation performed on automatically generated as-built 3D models

    Energy and Buildings, Vol. 68, Núm. PARTA, pp. 54-62

  3. LIDAR-equipped UAV for building information modelling

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  4. Non-destructive approach for the generation and thermal characterization of an as-built BIM

    Construction and Building Materials, Vol. 51, pp. 55-61

2013

  1. Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes

    Automation in Construction, Vol. 31, pp. 230-240

  2. Low-cost aerial unit for outdoor inspection of building façades

    Automation in Construction, Vol. 36, pp. 128-135

  3. Non-destructive testing for the analysis of moisture in the masonry arch bridge of Lubians (Spain)

    Structural Control and Health Monitoring, Vol. 20, Núm. 11, pp. 1366-1376

  4. Semantic as-built 3d models including shades for the evaluation of solar influence on buildings

    Solar Energy, Vol. 92, pp. 269-279

2012

  1. A multidisciplinary non-destructive approach to analyze moisture in historic masonry structures: Integration of both field and synthetic GPR data generated from photogrammetric and infrared imaging

    2012 14th International Conference on Ground Penetrating Radar, GPR 2012

  2. AUTOMATIC PROCEDURE FOR THE REGISTRATION OF THERMOGRAPHIC IMAGES WITH POINT CLOUDS

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  3. As-built BIM with shades modeling for energy analysis

    Proceedings of the 2012 18th International Conference on Virtual Systems and Multimedia, VSMM 2012: Virtual Systems in the Information Society

  4. Automation of thermographic 3D modelling through image fusion and image matching techniques

    Automation in Construction, Vol. 27, pp. 24-31

  5. E-actividades de aprendizaje en la documentación e inventario de estructuras históricas

    Investigaciones sobre docencia universitaria y nuevas metodologías (Educación Editora), pp. 183-188