Publicacións nas que colabora con Anton Cacabelos Reyes (17)

2016

  1. Integration of the free software GenOpt for a thermal engineering course

    Computer Applications in Engineering Education, Vol. 24, Núm. 3, pp. 356-364

  2. Suitability assessment of an ICE-based micro-CCHP unit in different Spanish climatic zones: Application of an experimental model in transient simulation

    Energies, Vol. 9, Núm. 11

2015

  1. Automating, monitoring, and control of an ICE based micro-CCHP system using LabVIEW and Android

    2015 IEEE Eindhoven PowerTech, PowerTech 2015

  2. Calibrated simulation of a public library HVAC system with a ground-source heat pump and a radiant floor using TRNSYS and GenOpt

    Energy and Buildings, Vol. 108, pp. 114-126

  3. Diseño y estudio de cargas térmicas de una vivienda-contenedor utilizando TRNSYS

    IX Congreso Nacional de Ingeniería Termodinámica: libro de actas. Cartagena, 3 al 5 de junio 2015 (Universidad Politécnica de Cartagena), pp. 970-977

  4. Estudio preliminar del efecto del entorno socioeconómico en estudiantes de Ingeniería Industrial medido a través del nivel de burnout

    Evaluación de la Calidad de la Investigación y de la Educación Superior: libro de resúmenes XI FECIES

  5. Implementación y ensayo de un sistema de microcogeneración basado en motor de combustión interna

    IX Congreso Nacional de Ingeniería Termodinámica: libro de actas. Cartagena, 3 al 5 de junio 2015 (Universidad Politécnica de Cartagena), pp. 961-969

  6. Metodología para la realización de procesos de optimización y calibración en prácticas de Ingeniería Térmica

    Evaluación de la Calidad de la Investigación y de la Educación Superior: libro de resúmenes XI FECIES

2014

  1. ASSESSMENT OF THE AUTONOMOUS TIME SPENT BY STUDENTS IN DIFFERENT COURSES IN THE MASTER OF OCCUPATIONAL RISK PREVENTION

    INTED2014: 8TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE

  2. ASSESSMENT OF THE TIME MANAGEMENT BY STUDENTS IN THE MASTER OF OCCUPATIONAL RISK PREVENTION

    EDULEARN14: 6TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES

  3. Development of an improved dynamic model of a Stirling engine and a performance analysis of a cogeneration plant

    Applied Thermal Engineering, Vol. 73, Núm. 1, pp. 608-621

  4. METHODOLOGY TO CARRY OUT SENSITIVITY ANALYSIS THROUGH FRIENDLY TOOLS FOR ITS USE IN PRACTICES OF BUILDING SIMULATION

    EDULEARN14: 6TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES

  5. USE OF THE SOFTWARE GENOPT AS A SUPPORT TOOL IN SIMULATION PRACTICES

    INTED2014: 8TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE

2013

  1. Biomass fuel and combustion conditions selection in a fixed bed combustor

    Energies, Vol. 6, Núm. 11, pp. 5973-5989

  2. Development of a transient model of a stirling-based CHP system

    Energies, Vol. 6, Núm. 7, pp. 3115-3133

  3. Feasibility of using a Stirling engine-based micro-CHP to provide heat and electricity to a recreational sailing boat in different European ports

    Applied Thermal Engineering, Vol. 59, Núm. 1-2, pp. 414-424

  4. Project based learning: Application to a research master subject of thermal engineering

    JOTSE, Vol. 3, Núm. 3, pp. 132-138