Publicacións (40) Publicacións de ELENA BEATRIZ MARTIN ORTEGA

2023

  1. 3D active mixing of confined power law aqueous polymer solutions: a comparative numerical study

    International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 33, Núm. 3, pp. 974-997

  2. Experimental study on the influence of a conical cavity’s inclination angle and aspect ratio on thermal behavior of a cone cooled with nanofluid saturated porous media

    Experimental Heat Transfer, Vol. 36, Núm. 7, pp. 970-983

  3. Model based optimization of a resin-impregnated paper air-drying line

    Drying Technology, Vol. 41, Núm. 9, pp. 1469-1483

  4. Numerical Modeling for the Prediction of Microstructure and Mechanical Properties of Quenched Automotive Steel Pieces

    Materials, Vol. 16, Núm. 11

  5. Pulsed 193 nm Excimer laser processing of 4H–SiC (0001) wafers with radiant exposure dependent in situ reflectivity studies for process optimization

    Materials Science in Semiconductor Processing, Vol. 168

2022

  1. Comparison of three-dimensional flow mixing via pulsation and dynamical stirring: application to the mixing of parallel streams at different temperatures

    International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 32, Núm. 6, pp. 1883-1910

  2. Experimental study on the thermal control of a roof-top collective building antenna using a porous matrix filled with Water-Copper nanofluid

    Case Studies in Thermal Engineering, Vol. 32

  3. Impact of Channels Aspect Ratio on the Heat Transfer in Finned Heat Sinks with Tip Clearance

    Micromachines, Vol. 13, Núm. 4

  4. Thermal behavior of a conical antenna cooled with nanofluid saturated porous media: effects of the cavity’s inclination and aspect ratio

    International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 32, Núm. 12, pp. 3935-3947

2021

  1. A predictive model for the industrial air-impingement drying of resin impregnated paper

    Applied Thermal Engineering, Vol. 199

  2. Heat transfer enhancement around a finned vertical antenna by means of porous media saturated with Water-Copper nanofluid

    Case Studies in Thermal Engineering, Vol. 28

  3. Modelling and numerical simulation of the quenching heat treatment. Application to the industrial quenching of automotive spindles

    Advances on links between mathematics and industry, CTMI 2019 (Springer Suiza), pp. 75-89

  4. Reduced order modelling in the manufacturing process of wire rod: Applications for fast temperature predictions and optimal selection of process parameters

    Advances on links between mathematics and industry, CTMI 2019 (Springer Suiza), pp. 59-74

2020

  1. Energy–efficient mixing generated by prescribed crosswise oscillations of a square prism in highly confined flows

    Chemical Engineering Science, Vol. 215

2019

  1. An efficient computational technique for the prediction of wire rod temperatures under different industrial process conditions

    Applied Thermal Engineering, Vol. 149, pp. 287-297

  2. Ellipsometric analysis of concentration gradients induced in semiconductor crystals by pulsed laser induced epitaxy

    Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, Vol. 37, Núm. 6

2018

  1. Experimental and numerical study on the flow topology of finned heat sinks with tip clearance

    International Journal of Thermal Sciences, Vol. 132, pp. 146-160

  2. Heat transfer downstream of a 3D confined square cylinder under flow pulsation

    Numerical Heat Transfer; Part A: Applications, Vol. 74, Núm. 12, pp. 1747-1769

2017

  1. Condensation of superheated R134a and R437A inside a vertical tube

    Science and Technology for the Built Environment, Vol. 23, Núm. 6, pp. 884-895

2016

  1. Analysis of the thermo-mechanical deformations in a hot forging tool by numerical simulation

    IOP Conference Series: Materials Science and Engineering