Publicacións nas que colabora con JULIA ARMESTO GONZALEZ (67)

2014

  1. Door recognition in cluttered building interiors using imagery and LiDAR data

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

  2. Indoor daylight simulation performed on automatically generated as-built 3D models

    Energy and Buildings, Vol. 68, Núm. PARTA, pp. 54-62

  3. Non-destructive approach for the generation and thermal characterization of an as-built BIM

    Construction and Building Materials, Vol. 51, pp. 55-61

2013

  1. Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes

    Automation in Construction, Vol. 31, pp. 230-240

  2. Evaluation of road signs using radiometric and geometric data from terrestrial LiDAR

    Optica Applicata, Vol. 43, Núm. 3, pp. 421-433

  3. Long range measurements using a contactless low cost optical sensor

    Optica Applicata, Vol. 43, Núm. 3, pp. 435-440

  4. Low-cost aerial unit for outdoor inspection of building façades

    Automation in Construction, Vol. 36, pp. 128-135

  5. Semantic as-built 3d models including shades for the evaluation of solar influence on buildings

    Solar Energy, Vol. 92, pp. 269-279

  6. Semi-automatic land consolidation software based on geographic information systems

    Computers and Electronics in Agriculture, Vol. 97, pp. 1-5

  7. Structural evaluation of historic masonry arch bridges based on first hinge formation

    Construction and Building Materials, Vol. 47, pp. 569-578

  8. Three-dimensional modeling of the romanesque church of santa maria de castrelos (Vigo - Spain) using terrestrial laser scanner

    International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

2012

  1. AUTOMATIC PROCEDURE FOR THE REGISTRATION OF THERMOGRAPHIC IMAGES WITH POINT CLOUDS

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  2. An innovative method for remote measurement of minimum vertical underclearance in routine bridge inspection

    Automation in Construction, Vol. 25, pp. 34-40

  3. As-built BIM with shades modeling for energy analysis

    Proceedings of the 2012 18th International Conference on Virtual Systems and Multimedia, VSMM 2012: Virtual Systems in the Information Society

  4. Automation of thermographic 3D modelling through image fusion and image matching techniques

    Automation in Construction, Vol. 27, pp. 24-31

  5. FROM GEOMETRY TO DIAGNOSIS: EXPERIENCES OF GEOMATICS IN STRUCTURAL ENGINEERING

    XXII ISPRS CONGRESS, TECHNICAL COMMISSION V

  6. Novel method to determine laser scanner accuracy for applications in civil engineering

    Optica Applicata, Vol. 42, Núm. 1, pp. 43-53

  7. Photogrammetry and laser scanner technology applied to length measurements in car testing laboratories

    Measurement: Journal of the International Measurement Confederation, Vol. 45, Núm. 3, pp. 354-363

  8. Procedure to evaluate the accuracy of laser-scanning systems using a linear precision electro-mechanical actuator

    IET Science, Measurement and Technology, Vol. 6, Núm. 1, pp. 6-12

  9. Single image rectification of thermal images for geometric studies in façade inspections

    Infrared Physics and Technology, Vol. 55, Núm. 5, pp. 421-426