Anton Cacabelos Reyes-rekin lankidetzan egindako argitalpenak (8)

2017

  1. Development of a new multi-stage building energy model calibration methodology and validation in a public library

    Energy and Buildings, Vol. 146, pp. 182-199

2015

  1. Calibrated simulation of a public library HVAC system with a ground-source heat pump and a radiant floor using TRNSYS and GenOpt

    Energy and Buildings, Vol. 108, pp. 114-126

2014

  1. Development of an improved dynamic model of a Stirling engine and a performance analysis of a cogeneration plant

    Applied Thermal Engineering, Vol. 73, Núm. 1, pp. 608-621

2013

  1. Biomass fuel and combustion conditions selection in a fixed bed combustor

    Energies, Vol. 6, Núm. 11, pp. 5973-5989

  2. Development of a transient model of a stirling-based CHP system

    Energies, Vol. 6, Núm. 7, pp. 3115-3133

  3. Diseño de un sistema de recuperación de energía en los gases de escape de un sistema de microcogeneración basado en motor de stirling utilizando módulos termoeléctricos

    VIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas

  4. Feasibility of using a Stirling engine-based micro-CHP to provide heat and electricity to a recreational sailing boat in different European ports

    Applied Thermal Engineering, Vol. 59, Núm. 1-2, pp. 414-424

  5. Project based learning: Application to a research master subject of thermal engineering

    JOTSE, Vol. 3, Núm. 3, pp. 132-138