Publicacións nas que colabora con Javier Arzúa Touriño (42)

2024

  1. An improvement in the method of correcting indirect radial strain measurements during triaxial strength tests in rocks

    MethodsX, Vol. 13

  2. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

2021

  1. Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito

    Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398

2020

  1. Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales

    Bulletin of Engineering Geology and the Environment, Vol. 79, Núm. 9, pp. 4975-4997

  2. Grinding or not grinding, that is the question

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

  3. Numerical and experimental characterization of mechanical behaviour of an artificially jointed rock

    ISRM International Symposium - EUROCK 2020

2019

  1. Analysis of a complex slope failure in a granodiorite quarry bench

    Bulletin of Engineering Geology and the Environment, Vol. 78, Núm. 2, pp. 1209-1224

2018

  1. Block toppling stability in the case of rock blocks with rounded edges

    Engineering Geology, Vol. 234, pp. 192-203

  2. Crack Damage Parameters and Dilatancy of Artificially Jointed Granite Samples Under Triaxial Compression

    Rock Mechanics and Rock Engineering, Vol. 51, Núm. 6, pp. 1637-1656

  3. Study of the mechanical behavior of intact and jointed rocks in laboratory with particular emphasis on dilatancy

    ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

2017

  1. An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models

    Procedia Engineering

  2. Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions

    Acta Geotechnica, Vol. 12, Núm. 6, pp. 1229-1242

  3. Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine

    ISRM AfriRock - Rock Mechanics for Africa

  4. Corrigendum to “Verification of a laboratory-based dilation model for in situ conditions using continuum models” [J Rock Mech Geotech Eng 6 (2014) 522–534] (S1674775514000869) (10.1016/j.jrmge.2014.09.004)

    Journal of Rock Mechanics and Geotechnical Engineering

  5. Diseño geotécnico de minas subterráneas de pizarra

    Boletín geológico y minero, Vol. 128, Núm. 2, pp. 405-420

  6. Efecto del desgaste de la roca y de la velocidad de ensayo en la determinación mediante tilt test del ángulo de fricción básico de juntas en roca

    Ingeniería civil, Núm. 187, pp. 43-52

  7. Sensitivity Analysis of the Micro-Parameters Used in a PFC Analysis Towards the Mechanical Properties of Rocks

    Procedia Engineering

  8. Simulación de ensayos triaxiales de granito mediante el código PFC

    Ingeniería civil, Núm. 187, pp. 33-42

  9. Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing

    Procedia Engineering

  10. Strapping of pillars with cables to enhance pillar stability

    Journal of the Southern African Institute of Mining and Metallurgy, Vol. 117, Núm. 6, pp. 527-540