Publicaciones en las que colabora con JUAN MARIA POU SARACHO (31)

2009

  1. Characterization of thin calcium phosphate coating

    Thin Calcium Phosphate Coatings for Medical Implants (Springer New York), pp. 25-66

1998

  1. Carbon nitride films prepared by guanazole laser ablation in ammonia atmosphere

    Carbon, Vol. 36, Núm. 5-6, pp. 781-784

  2. Depósito de capas de nitruro de carbono mediante ablación láser

    Revista de metalurgia, Vol. 34, Núm. 2, pp. 94-97

  3. Growth and characterization of carbon nitride thin films prepared by laser ablation

    Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 136-138, pp. 236-240

1997

  1. Carbon nitride films prepared by excimer laser ablation

    Applied Surface Science, Vol. 109-110, pp. 380-383

1996

  1. Photochemical vapour deposition of hydrogenated amorphous silicon-carbon thin films by using a Xe 2 * excimer lamp

    Applied Surface Science, Vol. 106, pp. 55-59

  2. Aging of photochemical vapor deposited silicon oxide thin films

    Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Vol. 14, Núm. 2, pp. 436-440

  3. Modification of silicon nitride films to oxynitrides by ArF excimer laser irradiation

    Surface and Coatings Technology, Vol. 80, Núm. 1-2, pp. 211-215

  4. Silica deposition by excimer-laser-induced chemical vapour deposition in perpendicular configuration

    Advanced Materials for Optics and Electronics, Vol. 6, Núm. 2, pp. 83-92

  5. Silica deposition by excimer-laser-induced chemical vapour deposition in perpendicular configuration

    Advanced Materials for Optics and Electronics, Vol. 6, Núm. 2, pp. 83-92

1993

  1. Study of the gas-phase parameters affecting the silicon-oxide film deposition induced by an ArF laser

    Applied Physics A Solids and Surfaces, Vol. 57, Núm. 2, pp. 181-185

  2. The effect of coating density on the strain tolerance of corrosion resistant amorphous silica

    Surface and Coatings Technology, Vol. 56, Núm. 3, pp. 267-272